3.4.6  
EVM 
 

Introduction  
The optional EVM (Entry Voice Mail) subboard enables the function of integrated voice mail in HiPath 3550, HiPath 3350, HiPath 3500, and HiPath 3300. The prerequisite for this is the use of the S30810-Q2935-A301/-A401 (CBCC) and S30810-Q2935-Z301/-Z401 (CBRC) central boards.
The EVM subboard is installed on the central CBCC and CBRC controls as follows:
 •   Up to HiPath 3000/5000 V7:
    The board is plugged directly into the X32 connector on the central control boards CBCC (see Section 3.2.1 "CBCC") or CBRC (see Section 3.2.2 "CBRC") using the connector strip X2.
   
Caution  
The EVM subboard must not be plugged in or out when the system is energized.  
Place the central control board on a flat surface before inserting the EVM subboard.  
The spacing bolts supplied guarantee the correct insertion of the subboard, so you should always mount them (see Figure 3-137).  
Otherwise you may damage the board.  
 •   As of HiPath 3000/5000 V8:
    The module is securely soldered on the central CBCC and CBRC controls.
HiPath Entry Voice Mail has capacity to store up to two hours of recorded messages. You can create up to 24 standard mailboxes and up to four of these can be configured as Auto Attendant mailboxes (attendant mailboxes with automatic call acceptance, greeting with routing options, day and night mode, speed dialing).
Information on administering HiPath Entry Voice Mail for HiPath 3000 can be found in the HiPath 3000/5000 Manager E Help.
Caution  
If using a different voicemail application (such as HiPath Xpressions Compact), the EVM voice mail ports must be deactivated. To do this, set the ports to the "Standard" station type and remove them from the active voicemail hunt group. Next set the number of mailboxes for autoconfiguration to "0". This prevents the user making accidental changes to Call Management.  

Interfaces  
 Figure 3-137   EVM (S30807-Q6945-X) - Interfaces
 

Individual announcements in the case of upgrades  
In the case of a Fast Upgrade, i.e., within a release, the individual announcements and messages are retained. In the case of an upgrade from HiPath 3000 V7 to V8, these announcements and messages are deleted.

HiPath 3000/5000 V9, Service Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3590S100017620   2014-02-27