3.2.4  
CMA 
 
Caution  
Place the central control board on a flat surface before inserting the CMA subboard.  
The spacing bolts supplied guarantee the correct insertion of the subboard, so you should always mount them (see Figure 3-7).  
Otherwise you may damage the board.  
 Figure 3-7   CMA with Spacing Bolts
 

Introduction  
The Clock Module ADPCM CMA (S30807-Q6931-X) is an optional subboard for the CBCC and CBRC central control boards. The CMA module is needed for special HiPath Cordless Office configurations.
All clock module small (CMS) functions are available when you insert a CMA module.
Please refer to Seite 3-42 for recommendations on CMA module implementation.

HiPath 3000/5000 V9, Service Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3590S100017620   2014-02-27