10.10.4  
SNMP partner/Communication Partner 
 


Settings | Network | SNMP partner
 
The SNMP communications partners (IP remote stations) that receive access rights for the SNMP functionality of the communication system, are configured via SNMP partner.

10.10.4.1  
SNMP Community table 
In Hicom 150 E Office Rel. 2.2, other applications (e.g. HiPath 3000 Manager, Telnet or TFTP) have access only if the corresponding IP addresses of the processor appear in this table.
As of Hicom 150 H V1.0 (Hicom 150 E Office Rel. 3.0), application access will be controlled via the firewall.

SNMP Transport Label column  
Data is managed in this column by double-clicking the corresponding table cell. The following values can be used:
   -   a wildcard (Nobody = none, Everybody = all)
   -   a specific IP address (Specific)

SNMP Community Name column  
The community name is used in Version 1 of the SNMP protocol as the access password. When users of the management station access the communication system using SNMP, they must specify the community name. For security reasons, it is advisable to change the default communities in accordance with the customer's instructions.
If the DB Feature Server cannot access the communication system, it reports a "node offline" status. In this case, the community name "private" must be entered in the second row. The SNMP authorization (see next column) for this entry must be set to "read/write".

SNMP Access column  

read  
The associated IP address has the right to read only.  
read / write  
The associated IP address has the right to read and write.  
none  
The associated IP address has no access rights. This option is used to temporarily deactivate entries without having to delete them.  
Traps are sent depending on the activation of SNMP in the firewall.

10.10.4.2  
SNMP Trap Community table 
The destinations for SNMP error messages (traps) are configured in this table. If a trap destination is configured, all associated fields should always be filled in.

SNMP Community Name column  
This field is used to identify the community to which the trap is assigned. The community also serves as the access password.

SNMP Address column  
Enter the IP address of the trap destination here. Wildcards are not allowed for traps. You can configure five target addresses for the corresponding management stations in the communication system.

Target Owner column  
You may store a description of the trap destination in plain text.

Target Status column  
You can activate or deactivate the configured trap destinations. This means you can temporarily deactivate configured, known destinations.

10.10.4.3  
IP Applications table 
As of HiPath 3000 V1.2, this table is kept under Firewall.  
The applications that are available in the Hicom 150 E Office are activated or made available here.
   -   As of Hicom 150 E Office Rel. 2.2:
The possible applications are released under the IP Applications parameter for the transport label entered under Administration Community.
   -   As of Hicom 150 H V1.0 (Hicom 150 E Office Rel. 3.0):
In the first column, enter the IP addresses from which the applications are to be started.
Max. 5 IP addresses can be entered.
If the IP address 0.0.0.0 is entered in the first line, only the HiPath 3000 Manager has access authorization (default) from all computers on the network.

IP address
(as of Hicom 150 H V1.0, Hicom 150 E Office Rel. 3.0)  
In this column, enter the IP addresses from which the applications are to be started.  
Telnet  
Telnet access is permitted (the Assistant T functionality is offered via Telnet). This means that access to the Hicom 150 E Office is possible from each processor in the network that supports the Telnet functionality. Then you can view and use the menu interface of the Asst T in the Telnet application window.
SNMP
(up to Hicom 150 H V1.0, Hicom 150 E Office Rel. 3.0)  
SNMP accesses are allowed.
CSTA
(as of Hicom 150 H V1.0, Hicom 150 E Office Rel. 3.0)  
CSTA over TCP/IP is allowed.
APS  
APS transfer over TFTP is allowed.
CDB  
CDB reading over TFTP is allowed.
HiPath 3000 Manager
(as of Hicom 150 H V1.0, Hicom 150 E Office Rel. 3.0)  
HiPath 3000 Manager access over TCP/IP is allowed.
Log  
Reading the log file over TFTP is allowed.
Call detail recording  
Outputting charges via TFTP is permitted.
ASCII  
Reading the system's basic configuration over TFTP is allowed.
You can enter the TFTP path names for the LOG file, the CDB, and the ASCII file under Options/Program Settings/General via Program options General.

See also:  
   -   Section 10.10 "Settings | Network"
   -   Section 10.10.7 "Firewall"
   -   Section 13.1.1 "Program options General"
   -   HiPath 3000/5000 Feature Description, LAN Network

HiPath 3000/5000 V9, Manager E, Administrator Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3590M1000176A9   2014-03-03