10.10.16 |
Ext. H.323-GK |
| Ext. H323-GK (external H.323 gatekeeper) is used by the HiPath system to register itself via the H.225 RAS as a gateway for an external gatekeeper. |
10.10.16.1 |
External H323 Gatekeeper Mode flag |
| Parameters for operation with an external H.323 gatekeeper can only be specified if this flag is activated. |
| Project-specific release is required for the "External H.323 Gatekeeper Mode" flag. An exception to this rule is made for simplified configuration of a third-party node (for example, HiPath 4000) without registration ("Perform Registrar" must be deactivated). |
10.10.16.2 |
Area: Gateway |
Environment |
| Since an external gatekeeper may involve various signaling options, the external gatekeeper is specified via this parameter. You can choose between |
| - | HiPath 4000 |
| - | a CISCO Gatekeeper (enabling is exclusively project-specific) |
| - | a connection to SURPASS |
| - | or one OpenScape Voice |
Trunking Mode |
| The trunking mode affects the H225 call signaling, i.e., the transmission of feature-specific information . You can choose between |
| - | H323 Native: no transfer of feature-specific information |
| - | H323 Annex: Feature-specific information is transferred |
Station number |
| The "Public Directory number" is configured here as in the case of the system number. The gateway in the own system can be reached under this number. |
Time to Live |
| Validity period for the registration, specified in seconds. Within the time period set here, the gateway registers itself cyclically at the external gatekeeper. |
10.10.16.3 |
Area: H.323 Security |
| This area is currently not yet supported by the system. |
10.10.16.4 |
Areas: Primary/Secondary Gatekeeper |
| The gatekeeper identity (GK-ID) of the external gatekeeper must always be entered. If it is omitted or is subject to errors, the registration of the gateway is rejected. |
IP address |
| IP address of the external gatekeeper. |
Port |
| Port number of the external gatekeeper. |
GK-ID |
| Name of the external gatekeeper. |
10.10.16.5 |
Perform Registrar |
| The system registers at the gatekeeper if this flag is activated. If this flag is deactivated, registration is not performed (for simplified configuration of a third-party node, such as, HiPath 4000). |
| |
| HiPath 3000/5000 V9, Manager E, Administrator Documentation, Issue 10 | up  |
|
 |
||
| Disclaimer & Copyright | ID: P31003H3590M1000176A9 | 2014-03-03 |
