10.10.14  
HiPath 5000 RSM/AllServe Parameters 
 


Settings | Network | HiPath 5000 RSM/AllServe Parameters
 
HiPath 5000 RSM/AllServe Parameters is used to specify the parameters for a networked system.

10.10.14.1  
Area: Server 

IP address  
The IP address of the server is entered here.
The IP address must be unique within the network . Any new IP address to be configured should therefore be "pinged" before it is assigned. If the IP address responds, it should not be assigned again.  

10.10.14.2  
Area: Node 

Node ID  
Each node in a networked system must be assigned a unique node ID. This enables the individual nodes in a networked system to be uniquely identified. Practical experience has shown that it is best to assign node ID = 1 to n.

See also:  
   -   Section 10.10 "Settings | Network"
   -   Section 10.10.9 "Firewall | Edit application firewall"

HiPath 3000/5000 V9, Manager E, Administrator Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3590M1000176A9   2014-03-03