10.10.11 |
Routing | Edit IP routing |
| To edit the parameters, double-click the corresponding table cell Routing. |
IP address |
| This is the IP address of the destination system or network. If the associated Subnet mask is 255.255.255.255, then a single system is assumed; otherwise, the IP address is interpreted as part of a network. In the latter case, the IP address 0.0.0.0 is also authorized. Using this setting, the accompanying Gateway is classified as a default gateway. |
Net mask |
| The subnet mask addresses subnets by masking IP address bits. It indicates the size of the subnet. You can transfer data directly from processor to processor within a subnet without having to establish a connection via a router or a gateway. |
Gateway |
| The gateway is the next router (computer) over which the desired destination (described by the IP address) can be reached. |
Record no. , <, >, New, Back |
| The number of the entry is displayed next to Record no.:. |
| The buttons < and > can be used to scroll between the routing entries that are already configured. |
| A new entry is set up using the button New. |
| Back returns you to Routing. There the data entered can be finally applied or rejected. |
|
| HiPath 3000/5000 V9, Manager E, Administrator Documentation, Issue 10 | up  |
|
 |
||
| Disclaimer & Copyright | ID: P31003H3590M1000176A9 | 2014-03-03 |
