10.9.7  
PhoneMail 
 


Settings | Auxiliary equipment | PhoneMail
 
The settings for PhoneMail are only required for networked communication systems with central PhoneMail (both CorNet-N or CorNet-NQ and QSIG). There must be a homogeneous call numbering plan. These settings need only be made in the PABX satellite systems.
Comment: This procedure replaces the solution using pseudo ports which was generally implemented for callback access to date. The pseudo port for call forwarding to PhoneMail is still required.
Valid for Rel. 1.0 and Rel. 2.2:
   -   A port which performs callback must be set up under Stations.
   -   A port which performs call forwarding to PM must be set up under Stations.
   -   A port which performs callback must be set up under Stations.
Valid for Rel. 3.0:
   -   A port which performs callback must be set up under Stations.
   -   A port which performs call forwarding to PM must be set up under Stations.
   -   A port which performs callback must be set up under Stations or the callback number is entered under Connection--> PhoneMail.
Valid for a networked system:
   -   A port which performs callback must be set up under Stations.
   -   A port which performs call forwarding to PM must be set up under Stations or the external entries in Call Management under Auxiliary Equipment... > PhoneMail can be used.
   -   A port which performs callback must be set up under Stations or the callback number is entered under Call forwarding.
Caution  
When using a Phonemail system, the ports of the EVM for voice mail usage must be decommissioned (see Section 10.9.18 "EVM (Entry Voice Mail)" for details).  

10.9.7.1  
Area: Callback access PhoneMail 

Call number  
If there is a message from a PhoneMail, the Mailbox key sets up a connection to the call number specified under 'Call number' when the message is requested.
In homogeneous networks, this call number is the same as the Callback Access Number from the PABX. This call number must be forwarded to the PABX by means of LCR (Least cost routing).

Name  
The name entered here appears on the display of the system telephone when the Mailbox key is pressed.

10.9.7.2  
Area: Live Recording Device 

Call Number  
If the recording of calls (Live Call Record) has been enabled, the active call will be recorded on the device whose call number is specified here.

See also:  
   -   Section 10.9.3 "Announcement"
   -   Section 10.9.18 "EVM (Entry Voice Mail)"

HiPath 3000/5000 V9, Manager E, Administrator Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3590M1000176A9   2014-03-03