10.9.19 |
EVM | Additional settings/General |
| The General tab allows you to define the settings that are common to all mailboxes. |
| To access the dialog box, click theEVM (Entry Voice Mail) Additional settings button on the tab. |
10.9.19.1 |
Area: General parameters |
Max. mailbox no. length |
| Here the maximum length of the mailbox number can be defined. |
| Setting range: 2 to 8 places |
| Default value: 2 or 3 places (depending on the communication system) |
Maximum message length (min) |
| This is the length that is available to the caller to have a message recorded (maximum length of the incoming message in minutes). |
| Setting range: 1 to 5 minutes |
| Default value: 2 minutes |
General fax intercept |
| The Fax intercept destination to which the EVM should normally send incoming faxes must be specified here. If no fax intercept destination is specified, the fax tone detection is also disabled. If a fax tone detection is desired, but no forwarding is to occur, an invalid destination must be entered here. |
| Setting range: Valid internal Fax number |
| Default value: none |
Call number length delimitation |
| If a call number length restriction has ben activated, only call numbers up to the specified length can be dialed from the EVM for outgoing calls (AutoAttendant suffix dialing and AutoAttendant speed dialing). In cases where longer call numbers have been configured, no connection is established. |
| Setting range: 1 to 30 |
| By default, the call number length restriction corresponds to the (internal) call number length of the mailbox, so only internal dialing is allowed. |
Standard lang. |
| The standard language selected here is applied to the settings for all mailboxes. |
No. of mailboxes for AutoConfiguration |
| Mailboxes up to the number specified here can also be configured automatically by subscribers. No further settings are required for the automatically configured mailboxes. If the number of mailboxes specified here is exceeded, no further automatic mailbox assignment can be performed by dialing the EVM. |
| If mailboxes have already been configured via the HiPath 3000 Manager, then fewer mailboxes will be available for the autoconfiguration. For example, if the value for the No. of mailboxes for AutoConfiguration is set to 12, and if 10 mailboxes are configured via the HiPath 3000 Manager, then only 2 more mailboxes may be configured by the user. |
| Setting range: 0 to 24 mailboxes |
| Default value: 12 mailboxes |
Call dest. list for AutoConfiguration |
| The call destination list (see Call forwarding) specified here is assigned to the automatically configured mailboxes. Call dest. list 18 is configured by default so that call forwarding to the EVM works without any additional settings. |
| Setting range: 1 to 500 (depending on the communication system) |
| Default value: 18 |
10.9.19.2 |
"Recording quality" area |
| This area controls in which quality greetings and messages are to be saved. This depends on the amount of memory space used. The following options are available: |
| • | Memory-optimized greetings and messages (less memory space required) |
| • | Greetings in HiQuality and memory-optimized messages (medium memory space required) |
| • | Greetings and messages in HiQuality (more memory space required) |
10.9.19.3 |
"AutoAttendant announcement behavior" area |
| This area determines which voice files are played for a caller by the EVM Auto Attendant (EVM: Extended Voice Mailbox). The following checkboxes can be activated or deactivated: |
|
| |
| HiPath 3000/5000 V9, Manager E, Administrator Documentation, Issue 10 | up  |
|
 |
||
| Disclaimer & Copyright | ID: P31003H3590M1000176A9 | 2014-03-03 |
