10.8.8 |
Service codes |
| In the communication system, each of the system's end-user features has been assigned a unique one- to four-digit access code. These codes are used to turn the features on or off. If required, you can change the default service codes. |
10.8.8.1 |
Codes table |
| If the code is preceded by an asterisk (*), it usually activates the feature. If the code is preceded by a pound sign (#), it usually deactivates the feature. |
10.8.8.2 |
Area: Substitution |
| The codes that replace * and # on IWV standard analog telephones and ISDN telephones are entered here. The default values are 75 for * and 76 for #. |
| Dial pulse (rotary) telephones and ISDN devices are digit-only; they do not recognize asterisks and pound signs. If your communication system has either rotary telephones or an ISDN device instead of a modem, digits must be substituted as a prefix to the service code. |
10.8.8.3 |
Buttons |
All database equal |
| This button is used to provide all speed dialing system lists in all communication systems in a networked system with uniform speed dialing destinations. |
| In a networked system, or if multiple CDBs are loaded, the current speed dialing destinations of the CDB being displayed are copied to all other CDBs. |
| The maximum number of destinations provided depends on the communication systems used in the networked system and is equal to the number provided by the smallest communication system. |
| If the button is grayed out, this means that the networked communication systems support a different number of speed dial destinations (e.g., a Pro supports 1000 speed dial destinations, but a Point supports only 300). Please note, however, that if speed dial destinations are entered in the Point, it is possible to match them against the Pro. |
Check |
| The communication system will not allow you to upload a database that contains duplicate service codes. The Check button can be used to check the uniqueness of the codes. Conflicts are displayed in a separate window. If relevant, a list of the duplicate assignments is also displayed. |
| |
| HiPath 3000/5000 V9, Manager E, Administrator Documentation, Issue 10 | up  |
|
 |
||
| Disclaimer & Copyright | ID: P31003H3590M1000176A9 | 2014-03-03 |
