10.7.7 |
Autom. night service |
| The Autom. night service is used to define the appropriate CO call privileges per route (trunk) via the individual class of service groups for the switchover between the day and night service. |
| The manual night service overrides the automatic night service, |
| which is configured via the schedule. The schedule covers the entire week (Monday through Sunday) as well as special days. Special days are public holidays or special days such as company holidays of the customer (see Section 10.7.8 "Special days"). Each day of the week can be assigned one of the 8 possible and specifiable daily profiles (Monday = 1, Sunday = 7, Special day = 8). These daily profiles can, in turn, be split into at least 4 time intervals for the switchover between the day and night services. Every daily profile includes the start and end times and the call numbers for the night stations. |
| The schedule for a day can be split into 4 time intervals. |
| These intervals can be defined sequentially and without gaps, i.e., the end time of the first interval may be identical to the start time of the second interval, for example. |
| However, an interval cannot have the same start and end times. The minimum length of an interval is 15 minutes. |
| If the last interval for a day ends at 24.00 hours (12 p.m.), the end time must be entered as 23:59 (11:59). If the first interval for a day begins at 0.00 hours, then the start time must be entered as 0:00. |
Editing the schedule |
| You can select any field in the schedule by clicking in it with the left mouse button. When you then click on the Night button to the right of the schedule, you can assign the appropriate night call number for that field. |
| You can the double-click on the desired field to open the Night service dialog, in which you can select the night call number and change the start and end times on a minute basis. |
| A left mouse click in a column header of the schedule, e.g., the column title Saturday, selects the entire Saturday column. When you then click on the Night button to the right of the schedule, you can assign the appropriate night call number for that column. |
| If none is entered for the night call number, night service per line is activated in the system. The destinations for this are entered under Settings | Incoming calls | Ringing assignment per line as usual. |
| The timers entered via the automatic night service apply for all trunks. |
| Clicking the Day button on the right of the schedule switches off the automatic night mode for the selection. |
10.7.7.1 |
Context menu |
| The context menu is activated by using the right mouse button. |
| |
| HiPath 3000/5000 V9, Manager E, Administrator Documentation, Issue 10 | up  |
|
 |
||
| Disclaimer & Copyright | ID: P31003H3590M1000176A9 | 2014-03-03 |
