10.4.13  
QSIG features (not in the USA) 
 


Settings | Lines/networking | QSIG features
 
In a network consisting of several communication systems, any connection information that occurs (CDRC data) in the PABX satellite systems is sent to a fixed communication system in the network. For this purpose, the call number of the destination system (call number of central recording system) to which the connection data is sent is configured in each communication system.

10.4.13.1  
Area: Own system data 
This data identifies your own communication system in the network. The data applies to both busy signaling and for connection data routing.

System number  
In a network consisting of several communication systems, each communication system has its own system number. If the communication system is networked with such communication systems, and you wish to use the QSIG features, the system numbers (1-255) must also be administered here for compatibility reasons.

Group number  
Stations can be divided into groups in the communication systems. They are assigned a unique group number. This type of grouping does not exist in the communication system. However, for compatibility reasons, the group numbers (1-40) must also be administered here.

10.4.13.2  
Area: Inter-system busy signaling 
This data defines a communication system where centralized busy signaling is used. The system can be either the PABX or a PABX satellite system.

System no. target system  
The system number (1-255) of the target system is defined here.

Call no. target system  
Call number of the communication system that is set up as a central recording system.
Only the PABX number needs to be entered here, i.e., without any station number, and the fact that no extension is entered for this PABX number must be taken into account in the LCR dial plan!  
Example:
If the call number of the destination system is: 999  
The dial plan entry must then be: -999 (and not -999XXX or -999Z)  

10.4.13.3  
Area: Connection data routing 
This data defines a communication system where centralized connection data recording takes place. The system can be either the PABX or a PABX satellite system.

Call no. target system  
Call number of the communication system that is set up as a central recording system (see also Call no. target system further above).

See also:  
   -   Section 10.4 "Settings | Lines/networking"

HiPath 3000/5000 V9, Manager E, Administrator Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3590M1000176A9   2014-03-03