10.2.11  
Gateway (V5.0 and Later) 
 


Settings | Set up station | Gateway
 
Gateway is used to configure the S0 stations of the station ports of the inserted HG 1500 boards.

10.2.11.1  
Area: Selection 

HG 1500 Card  
Under HG 1500 Board, select an inserted HG 1500 board in the communication system that is not configured as a gatekeeper (see also Settings | Network | Gatekeeper).

10.2.11.2  
Stations table 
This table displays all station ports which are free in the communication system and which can be configured, as well as all configured station ports for this card.

Selected station, S0 Extension, Setup  
Setup can be used to configure all selected station ports as S0 extensions on the selected HG 1500 board.

Selected station, Delete  
All selected station ports are deleted by pressing Delete.

Configured station  
This field shows the number of S0 stations set up for the selected HG 1500 board.

See also:  
   -   Section 10.2.10 "Gatekeeper (V5.0 and Later)"
   -   Section 10.4 "Settings | Lines/networking"
   -   Section 10.10.15 "Gatekeeper"
   -   Section 11.1.1 "Cards"
   -   Section 11.1.2 "Card Configuration | T1 Configuration"
   -   Section 11.1.3 "Card Configuration | Card data"

HiPath 3000/5000 V9, Manager E, Administrator Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3590M1000176A9   2014-03-03