|
|
|
|
|
|
|
| The programmed extension rings.
|
|
|
|
Configure a station name:
Subscriber, Change name for relevant station
|
Configure routes:
Routes, Enter the name for the desired route
|
|
| Call the station from another internal telephone with display.
|
| The calling party name appears on the display.
|
|
|
|
| Before configuring an entrance telephone, you should first delete all features for this station.
|
|
| The entrance telephone ring destination sets up a voice connection to the entrance telephone.
|
| You can activate the door opener from the ring destination if configured.
|
|
|
|
|
| Select the procedure for a PSE search.
|
| Verify that the search procedure is implemented.
|
|
|
|
|
| Enter *68 or press the Send Message key.
|
| Enter the internal station number of the destination.
|
| The transmitted text appears on the display of the destination station.
|
| Enter the code (#68-0) or press the key to delete the message.
|
|
|
|
|
| Use code *69 or a configured function key on a system telephone with display to activate an absence text.
|
| Call the station from another system telephone with display.
|
| The activated message appears in the display.
|
|
|
|
|
|
|
|
|
| Press the internal phonebook key.
|
| Wait for an answer from the LDAP server.
|
|
|
|
|
| Lift the handset (on telephones without a microphone).
|
| Activate the room monitor feature by dialing *88 or pressing the Room Monitor key.
|
| Call this extension from another internal station. The call is immediately through-connected. All sounds in the room are transmitted.
|
|
|
|
|
| Activate digit transmission.
|
|
