Feature	Setup	Testing
Last Number Redial (LNR)	Enable redial with ACCT throughout the system: Flags	Set up an external connection.   Release the external connection.   The dialed number is in the redial memory.   If "redial with ACCT" is enabled,   enter ACCT.   Press the redial key. Press the redial key to step through the stored numbers (and the ACCT).   The system dials the station number (ACCT) after a short waiting time.
System Speed Dialing	Speed dialing system, Enter the trunk group code, station number, and name for the desired speed-dialing destination	Access the speed-dialing destination by entering a code (*7 + destination number) or using a key + destination number.   The system sets up an external connection.
System Speed Dialing in Tenant Systems	Speed dialing system, Enter the trunk group code, station number, and name for the desired speed-dialing destination   Administer the speed-dialing number range under Group assignment.	Access the speed-dialing destination by entering a code (*7 + destination number) or using a key + destination number.   The system sets up an external connection.
Trunk Seizure Type and Prime Line On (Automatic Line Seizure)	Configure Prime Line on: Routing parameters   Assign trunk group: Trunks   Configure trunk keys/call keys: Key programming	Configure Prime Line on.   Dial a number.   The trunk is automatically seized.
Block dialing	Settings | Least Cost Routing	Configure automatic least cost routing with block dialing.   Dial an external station number.   The trunk is seized when the timer has expired and outdialing is completed.
Dial Tone Detection	Configure audible tone monitoring: Routing parameters, Pause before dial and Analysis of second dial tone   Configure times: Time parameters, Dial tone monitoring time and Time between HT analysis and dialing	Configure pause before dialing.   The digits are transmitted after the pause time expires.
End-of-Dialing Recognition	Time parameters	Dial an external number.   The last digit is transmitted after the timer expires.
Trunk Signaling Method	Trunks | Parameter/MSI flags	Seize an analog trunk.   The correct signaling method is detected automatically.
Configurable Toll Restriction	Configure allowed/denied lists: Allowed/Denied numbers   Configure station class of service: Station	Authorize a station for outward-restricted trunk access.   The station cannot set up an outgoing external connection (exception: speed dialing system).
Traffic Restriction Groups	Configure ITR matrix:   CON matrix   Configure ITR groups: Group assignment	Configure several ITR groups.   From one station, attempt to call another station in a different ITR group.   Stations with different ITR classes of service cannot make calls to each other.   Whether stations can make calls to one another depends on their class of service in the ITR matrix.
Private Trunk	Configure ITR matrix:   CON matrix   Configure ITR groups: Group assignment	Only the station configured can seize the private trunk.
Trunk Queuing	Flags	Station A seizes a trunk.   Station B presses the trunk key or dials a CO code.   Confirm that "Trunk queuing" should be performed.   Station A hangs up.   Station B rings; user picks up the handset and hears a dial tone.
Denied List for Undialed Trunks	Allowed/Denied numbers, Assign reference station in Station, Assign COS group for reference station	A user calls the attendant console (AC).   The AC sends dial tone to the user via the "Transfer trunk" menu option.   The user can set up a call within the allowed area by seizing a trunk (0).
Assigning Speed-Dialing Numbers to ITR Groups	Group assignment	A user dials an allowed speed-dialing number: OK.   A user dials a denied speed-dialing number: no authorization.
Codelock intercept	Configure intercept destination: Intercept / Attendant, Codelock intercept	-
Keypad dial	Enable keypad dialing by trunk group: Routing parameters, Select trunk group and set keypad dialing routing flag.   Enable keypad dialing by station: Station view: Flags, Keypad dial	Activate keypad dialing (service menu or code *503).   Select trunk.   Enter keypad information.   Test appropriate network provider service.
E911 Emergency Call Service (USA Only)	Trunks | Parameter/General Flags, E911 Emergency Call Service	After installing and configuring the feature, arrange a test call with the emergency call center; this test call verifies that the call proceeds without errors.
CLIP no screening	Routes, Enter system number - incoming, Enter system number - outgoing, Activate or deactivate "suppress station number"   Routing parameters, Select no. and type, outgoing	Have the "no screening" option configured in the public exchange.   Call a free subscriber.   The subscriber display shows the configured system number - outgoing.