6.10  

Other Features 
 

Feature  
Setup  
Testing  
Voice Channel Signaling Security  
Station view: Flags  
Place a call from a telephone with call waiting rejection.  
Call the station.  
The call waiting tone does not sound. You receive a busy signal on the calling station.  
Date and Time Display  
In communication systems without digital trunks  
Set the daylight saving time table:
Daylight saving time/DISA  
Set the date format:
Display  
For digital trunks, set up an external call. The date and time are set automatically if the central office generates a message containing this information (not for the USA).  
In communication systems without digital trunks and for digital trunks in the U.S., set the date and time using the procedure described above.  
Actuators  
Actuators  
Dial the code for the relay.  
The relay activates as configured.  
Sensors  
Sensors  
-  
Multilingual Text Output  
Replace existing system language:
Transfer | Loadable texts, Select the text to be loaded or deleted  
Transfer | Communication, Start loading the text  
Select a language for each station:
Station view: Flags  
The display on the system telephone appears in the language selected.  
Associated Dialing  
Station view: Flags  
From an authorized station, dial a station number for another station.  
Example: An authorized station dials 01191 to the central office for station 12.  
* 67 12 0 01191  
Associated services  
Station view: Flags  
From an authorized station, activate a feature for another station using the procedure. (for example, station 11 activates call forwarding to internal station 13 for station 16).  
Station 11 dials: * 83 16 *11 13  
Display Number of Stations with Direct Trunk Access  
Display stations:
CO call privileges: Number of  
Display the number of stations with direct trunk access using the procedure.  
Reset Activated Features  
Flags, Select the station whose features you want to delete  
-  
Relocate  
Enable Relocate system-wide:
Flags, Relocate allowed  
Start Relocate function (code or Service menu, etc.).  
Enter internal number of the destination station.  
Enter telephone lock PIN (if needed).  
After confirmation that the feature has executed successfully (display "Stn. number: XXXXX"), check that the exchange of the individual user profiles (station number, key programming, trunk access, etc.) has taken place.  
Delete all call numbers  
Delete Call Numbers  
-  
Team/Top Configuration  
Team Configuration  
Top Configuration  
Team/top  
-  
Automatic conference release (MULAP privacy release)  
Key programming  
Key code = MULAP privacy release  
-  
Storing Procedures on Procedure Keys  
Key programming  
Key code = procedure key  
Procedure = max. 32 characters (0 ... 9, *, #, P (Pause))  
Press procedure key.  
The procedure is executed.  
Customer-specific display  
System settings  
The new text appears in the display on all telephones immediately after you change it.  
IP Mobility  
IP Mobility Extension  
Station view: Workpoint Client  
-  
Live Call Record (Voice recording)  
Station view: Flags (Voice recording)  
Flags (Warning tone during voice recording)  
PhoneMail (Live Recording Device)  
IVM | Additional Settings/General  
Service codes  
An authorized station activates the procedure. Recording begins.  
Logos for OpenStage terminals (as of HiPath 3000 V7 R3)  
Station  
System parameters  
System settings  
OpenStage logo  
-