5.2  
Features for Incoming External Traffic 
 

5.2.1  
Call allocation 
 
Implementing features, see also Manager E Call Allocation

Definition  
Within call management, two call allocation tables are provided for incoming calls on analog or digital trunks. One of these tables is evaluated for day service and the other for night service. These tables define the station to which a call should be forwarded. This feature can also be used to assign a trunk to a specific station.
The "Ringing Assignments" screen in HiPath 3000/5000 Manager E is used to determine which stations (or groups) are assigned to each of the system trunks. Each port is assigned a call number in the Stations/Groups: Line Assignments table. This call number can be the internal call number of an active or an inactive station or group. Different call numbers can be assigned for day and for night. The call number in this table tells the system that when a call comes in through that port, it should be signaled, not at this station, but according to the Call Destination List for this station.
Refer to Section 3.1.3 "Call Management (CM)" for details.

Model-Specific Data  

 Subject  
 HiPath 3800  
 HiPath 3550  
 HiPath 3500  
 HiPath 3350  
 HiPath 3300  
Feature available in  
 x  
 x  
 x  
Hardware requirements  
 -  
 -  
 -  
Software requirements  
 V5.0 or later  
 V1.0 or later  
 V1.0 or later  

Dependencies/Restrictions  

 Subject  
 Dependency/Restriction  
DTMF DID  
An analog call may be released before call forwarding-no answer is completed.
This is due to the permanent timers that prevent trunks from becoming frozen.  
Call allocation table  
A number of calls can be waiting simultaneously at the stations entered in the call allocation tables.  
Intercept  
Calls are intercepted if they cannot be switched because there are no available stations.  

HiPath 3000/5000 V9, Feature Description, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3590F100017618   2014-02-27