5.3.14 Temporary station number display suppression

5.3.14	Temporary station number display suppression

Definition

This feature prevents a calling or called party from receiving a station number display. The feature is designed as a changeover function; the changeover applies until it is deliberately canceled (changeover repeated).

This feature applies only to incoming from or outgoing calls to an ISDN public network connection. The system-wide flag, Call Number suppression on, can be set to suppress the system Caller ID display. The default setting is off; that is, the number is not suppressed.

The feature is designed as a changeover function; that is, the changeover applies until it is deliberately canceled (changeover repeated).

The system-wide flag Call Number Suppression Override does not apply in the US.

All types of telephones can invoke this feature.

The Flags screen is one of three screens in the System Status pathway of HiPath 3000/5000 Manager E that provides station-specific (rather than system-specific) status information. You can use the Flags screen to see if a station has activated Number Suppression or not.

Model-Specific Data

Subject

HiPath 3800

HiPath 3550

HiPath 3500

HiPath 3350

HiPath 3300

Feature available in

Hardware requirements

Software requirements

V5.0 or later

V1.0 or later

Dependencies/Restrictions

Subject

Dependency/Restriction

Station number transmission

Temporary station number suppression must be supported by the trunk.

System-wide station number display suppression

If station-wide station number display suppression is activated (CLIR and COLR), it cannot be overridden.

CLIR

It is possible to ignore an activated CLIR setting and display the station number of the calling station. This can be useful for emergency calls and in similar situations.

Default access codes

*86 to suppress, #86 to display the number

HiPath 3000/5000 V9, Feature Description, Issue 10		up

Disclaimer & Copyright	ID: P31003H3590F100017618	2014-02-27