3.2.4  
Automatic COS Changeover after Timeout 
 
Implementing features, see also Manager E Automatic COS Changeover

Definition  
The previous COS changeover function (see Section 3.2.3 "System Telephone Lock (Changeover)") could only distinguish between day and night service. This changeover type is valid for all stations.
With automatic COS changeover, stations are combined to form profiles (e.g. management, sales). A schedule can be configured for each profile. This defines which COS is to be used for which timeslot during the week.

Connection between Automatic COS and Automatic Night Service  
The COS feature is correlated with automatic/manual day/night service. The following restrictions apply:
 •   Reaching the call destination via Call Management
This takes place via Call Management and does not depend on automatic class-of-service changeover. There are different call lists for day and night.
 •   Intercept destinations
The intercept destination is only defined by the automatic/manual day service/night answer.
 •   COS group:
At night, the relationship between the COS group and the station is fixed (configurable). This is not affected by automatic COS changeover.
During the day, the COS group can switch between specific times of the day if "Automatic COS " is set system-wide. Alternatively, if "Automatic COS" is not set, the COS group has a fixed (configurable) relationship with the station.

General Description  
 •   If "Automatic COS" is not set system-wide, no changes are made to the COS group that is currently set. A station can have a different COS group for day and night.
 •   If "Automatic COS" is set system-wide for the day, the profile and schedule that is configured will determine the COS group that is assigned to a station. At night, the station has the same COS group as previously assigned. Each profile has a different schedule to which the relevant COS group (CG) is assigned.
 Figure 3-3   Example for a Schedule
 
 •   Manual activation of the code lock overwrites automatic mode for the associated station.
 •   In the default scenario, automatic changeover of COS classes is deactivated. The existing COS class and call forwarding algorithm are applied.
 •   Automatic COS changeover and day/night service do not function across all nodes.
 •   Only one time zone is supported by the system. Remote station groups working in different time zones are set to the system's time zone.

Model-Specific Data  

 Subject  
 HiPath 3800  
 HiPath 3550  
 HiPath 3500  
 HiPath 3350  
 HiPath 3300  
Feature available in  
 x  
 x  
 x  
Hardware requirements  
 -  
 -  
 -  
Software requirements  
 V6.0 or later  
 V6.0 or later  
 V6.0 or later  

Dependencies/Restrictions  

 Subject  
 Dependency/Restriction  
Automatic Night Service  
The "Automatic Night Service" feature has priority over the "Automatic COS Changeover" feature. If automatic night service is activated, the COS is handled as normal and the COS group applied for the night. The COS schedule is only relevant during the day.  
 
Times that were entered over the automatic night service apply for all trunks.  

HiPath 3000/5000 V9, Feature Description, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3590F100017618   2014-02-27