3.1.23  
ANI (For Selected Countries Only) 
 

Definition  
The ANI feature (automatic number identification) displays the calling party's station number, which is transmitted over analog trunks.
While the phone is ringing, the station number is transmitted by BFSK (binary frequency shift keying) during the first ringing phase. HiPath 3000 supports the feature only until the called party lifts the handset.
In V4.0 SMR-7 or later, the subscriber name is evaluated in addition to the call number and is displayed on the telephone.
Internally, the system handles ANI data just like an ISDN number.
To run the ANI feature, you must have the ANI4 or ANI4R options board, which is used in conjunction with the TMGL4 or TMGL4R trunk board.

Model-Specific Data  

 Subject  
 HiPath 3800  
 HiPath 3550  
 HiPath 3500  
 HiPath 3350  
 HiPath 3300  
Feature available in  
 -  
 x  
 x  
Hardware requirements  
 -  
 ANI4  
 ANI4R  
 ANI4  
 ANI4R  
Software requirements  
 -  
 V1.0 or later  
 V1.0 or later  

Dependencies/Restrictions  

 Subject  
 Dependency/Restriction  
Country specifics  
Requires country-specific boards or firmware versions.  
Trunk boards  
The trunk boards used must support call charging module assignment GMZ (not for U.S.).  

HiPath 3000/5000 V9, Feature Description, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3590F100017618   2014-02-27