10.1.2 |
OpenStage Terminals |
10.1.2.1 |
OpenStage 10 |
Product image |
Versions |
| HiPath 3000/5000 V7 R3 and higher supports the TDM connection variant (OpenStage 10 T). |
Main features |
Downward compatibility to earlier systems |
| OpenStage 10 T can be registered as an optiPoint 500 entry on earlier HiPath communication systems (in other words, on HiPath 3000 V7 systems). OpenStage 10 T can be switched to optiPoint mode via a simple menu. In HiPath 3000 Manager E, an optiPoint 500 entry is visible instead of an OpenStage 10 T. |
10.1.2.2 |
OpenStage 15 |
Product image |
|
| Fig. 10-2 | OpenStage 15
|
Versions |
| OpenStage 15 is supported in the CorNet-IP (HFA) connection variant by HiPath 3000/5000 V8 R2 and higher and in the TDM connection variant (OpenStage 15 T) by HiPath 3000/5000 V7 R6 and higher. |
Main features |
|
Downward compatibility to earlier systems |
| OpenStage 15 T can be registered as an optiPoint 500 standard on earlier HiPath communication systems (in other words, on HiPath 3000 V7 systems). OpenStage 15 T can be switched to optiPoint mode via a simple menu. In HiPath 3000 Manager E, an optiPoint 500 standard is visible instead of an OpenStage 15 T. |
10.1.2.3 |
OpenStage 20 |
Product image |
Versions |
| HiPath 3000/5000 V7 R3 and higher supports the CorNet-IP (HFA) and TDM connection variants (OpenStage 20 T). The following telephones are available for the CorNet IP (HFA) connection variant: |
| • | OpenStage 20 E (without full-duplex speakerphone mode) |
| • | OpenStage 20 |
| • | OpenStage 20 G (gigabit variant) |
Main features |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
10.1.2.4 |
OpenStage 30 |
Product image |
Versions |
| HiPath 3000/5000 V8 R4 and higher supports the TDM connection variant (OpenStage 30 T). |
Main features |
|
Downward compatibility to earlier systems |
| OpenStage 30 T can be registered as an optiPoint 500 advance on earlier HiPath communication systems (in other words, on HiPath 3000 V7 systems). OpenStage 30 T can be switched to optiPoint mode via a simple menu. In HiPath 3000 Manager E, an optiPoint 500 advance is visible instead of an OpenStage 30 T. |
10.1.2.5 |
OpenStage 40 |
Product image |
Versions |
| HiPath 3000/5000 V7 R3 and higher supports the CorNet-IP (HFA) and TDM connection variants (OpenStage 40 T). The following telephones are available for the CorNet IP (HFA) connection variant: |
| • | OpenStage 40 |
| • | OpenStage 40 G (gigabit variant) |
Main features |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
10.1.2.6 |
OpenStage 60 |
Product image |
Versions |
| OpenStage 60 is supported in the CorNet-IP (HFA) connection variant by HiPath 3000/5000 V7 R3 and higher and in the TDM connection variant (OpenStage 60 T) by HiPath 3000/5000 V7 R4 and higher. The following telephones are available for the CorNet IP (HFA) connection variant: |
| • | OpenStage 60 |
| • | OpenStage 60 G (gigabit variant) |
Main features |
|
10.1.2.7 |
OpenStage 80 |
Product image |
Versions |
| OpenStage 80 is supported in the CorNet-IP (HFA) connection variant by HiPath 3000/5000 V7 R3 and higher and in the TDM connection variant (OpenStage 80 T) by HiPath 3000/5000 V7 R4 and higher. The following telephones are available for the CorNet IP (HFA) connection variant: |
| • | OpenStage 80 |
| • | OpenStage 80 G (gigabit variant) |
Main features |
|
10.1.2.8 |
Connection and Startup |
CorNet-IP connection variant (HFA) |
| HiPath 3000 together with HiPath Xpressions Compact supports the central administration of the IP terminals connected to the system. For this purpose a Deployment Tool (DLS Interface DLI) has been implemented on the HiPath Xpressions Compact boards. The DHCP and FTP servers integrated in DLI support the following: |
| • | the central configuration of parameters for all IP terminals connected enabling plug&play operation |
| • | the central software update of all IP terminals connected |
| For information about the prerequisites for using the DLI function, see Section 10.3 "Central Administration of IP Workpoints via the System". |
|
| For information about OpenStage terminal administration, see CorNet-IP Connection Variants in the OpenStage Administrator Manual. |
TDM connection variants |
| After connecting the terminal, all LEDs on the terminal and all LEDs on any other add-on devices connected light up (the LEDs on add-on device do not have to flash in synchronism with workpoint LEDs). All pixels on the display also activate briefly. These indications show that the telephone is starting up and performing a self-test. Downloading has finished and the telephone is ready for operation when you see the date and time on the display. |
| Use HiPath 3000/5000 to configure the OpenStage terminals for HiPath 3000/5000 Manager E. |
Administration and Software Upgrade |
| For the CorNet-IP connection variant (HFA) the administration and software upgrade is enabled by the Deployment and Licensing Service. The relevant information is provided in the Deployment Service Administrator Manual. |
| Software image releases are available on the MMC for the TDM connection variants. |
Download |
| The manuals and tools mentioned can be downloaded here: http://www.enterprise-communications.siemens.com/global/Products.aspx (... -> Downloads). |
10.1.2.9 |
Ports on the Underside of the Telephone for the CorNet-IP Model |
| This section shows the ports on the underside of OpenStage CorNet IP (HFA) telephones. These ports are explained in Section 10.1.2.11 "OpenStage Terminals - Description of Ports". |
OpenStage 15 for CorNet IP |
|
| Bild 10-8 | OpenStage 15 (CorNet IP) - Underside of the Telephone
|
OpenStage 20, OpenStage 40 for CorNet-IP |
|
| Bild 10-9 | OpenStage 20, OpenStage 40 (CorNet IP) - Underside of the Telephone
|
OpenStage 60, OpenStage 80 for CorNet-IP |
|
| Bild 10-10 | OpenStage 60, OpenStage 80 (CorNet IP) - Underside of the Telephone
|
10.1.2.10 |
Ports on the Underside of the Telephone for the TDM Model |
| This section shows the ports on the underside of OpenStage TDM telephones. These ports are explained in Section 10.1.2.11 "OpenStage Terminals - Description of Ports". |
OpenStage 10 T, OpenStage 20 T |
|
| Bild 10-11 | OpenStage 10 T, OpenStage 20 T - Underside of the Telephone
|
OpenStage 15 T |
|
| Bild 10-12 | OpenStage 15 T - Underside of the Telephone
|
OpenStage 30 T, OpenStage 40 T |
|
| Bild 10-13 | OpenStage 30 T, OpenStage 40 T - Underside of the Telephone
|
OpenStage 60 T, OpenStage 80 T |
|
| Bild 10-14 | OpenStage 60 T, OpenStage 80 T - Underside of the Telephone
|
10.1.2.11 |
OpenStage Terminals - Description of Ports |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| HiPath 3000/5000 V8, Service Documentation, Issue 10 | up  |
|
 |
||
| Disclaimer & Copyright | ID: P31003H3580S100017620 | 2011-01-24 |
