10.8.1  
External AC Adapters 
 
You may need an external AC adapter if you are using large configurations or if you need to extend the range.

10.8.1.1  
Local Power Supply for optiPoint 500, optiPoint 600 office 
You can connect a local power supply to the line cords of a host or client telephone using two RJ11 jacks and the connection cable supplied (see Fig. 10-53).

Variants  
 •   Local power supply, Euro: AUL:06D1284 (C39280-Z4-C71 = number entered on unit)
 •   Local power supply, UK: AUL:06D1287 (C39280-Z4-C72 = number entered on unit)
 •   Local power supply, 110 V USA: AUL:51A4827 (C39280-Z4-C73 = number entered on unit)

Technical data for local power supply AUL:06D1284 (Euro)  
 •   Line voltage: 220 (230) VAC
 •   AC line frequency: 47 ... 53 Hz
 •   Output voltage: max. 50 VDC, min. 30 VDC
 •   Output current: Max. 250 mA

 Table 10-10   Pin Assignment for Local Power Supply AUL:06D1284 (Euro) 
 Pin  
 Assignment  
 1  
 Not used  
 2  
 -  
 3  
 a-wire (tip)  
 4  
 b-wire (ring)  
 5  
 +  
 6  
 Not used  

Example: External AC Adapter Connection  
 Fig. 10-53   Example: External AC Adapter Connection
 

10.8.1.2  
Power supply unit for optiPoint 410/410 S and 420/420 S 
The AC adapter features two MW6 connectors. Power is supplied to a telephone via the left board marked "Digital".

Variants  
 •   AC adapter, Euro: C39280-Z4-C510
 •   AC adapter, UK: C39280-Z4-C512
 •   AC adapter, 110 V USA: C39280-Z4-C511

Technical specifications  

 Technical specifications  
 AC adapter, Euro:  
 C39280-Z4-C510  
 AC adapter, UK:  
 C39280-Z4-C512  
 AC adapter, 110 V USA:  
 C39280-Z4-C511  
Line voltage  
 230 Vac  
 230 Vac  
 120 VAC  
Line frequency  
 50 Hz  
 50 Hz  
 60 Hz  
Output voltage  
 max. 43 Vdc,  
 min. 30 Vdc  
 max. 43 Vdc,  
 min. 30 Vdc  
 max. 43 Vdc,  
 min. 30 Vdc  
Output current  
 480 mA  
 480 mA  
 480 mA  

HiPath 3000/5000 V8, Service Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3580S100017620   2011-01-24