10.2.3  
Connection and Startup 
 

optiPoint 410, optiPoint  420  
HiPath 3000 together with HiPath Xpressions Compact supports the central administration of the IP terminals connected to the system. For this purpose a Deployment Tool (DLS Interface DLI) has been implemented on the HiPath Xpressions Compact boards. The DHCP and FTP servers integrated in DLI support the following:
 •   the central configuration of parameters for all IP terminals connected enabling plug&play operation
 •   the central software update of all IP terminals connected
For information about the prerequisites for using the DLI function, see Section 10.3 "Central Administration of IP Workpoints via the System".
The DLI function can only be used for standalone systems.  
The Deployment and Licensing service is available for networked HiPath 3000 systems with or without HiPath 5000 RSM. The Deployment and Licensing service can also be used for systems that do not satisfy the prerequisites for using the DLI function. For information on how to use this tool, see the Deployment Service Administrator Manual.  
For information on terminal administration, refer to the optiPoint 410/420 Administrator Manual.

optiPoint 410 S, optiPoint 420 S  
For information on how to connect and start up terminals, refer to the optiPoint 410 S/420 S Administrator Manual:
The software can be upgraded over:
 •   the Deployment and Licensing service
Information on the procedure can be found in the Deployment Service Administration Manual.
 •   the WBM access at the relevant optiPoint IP telephone.
The optiPoint 410 S/420 S Administrator Manual contains information on this procedure.

Download  
The manuals and tools mentioned can be downloaded here:
http://www.enterprise-communications.siemens.com/global/Products.aspx (... -> Downloads).

10.2.3.1  
Ports on the Bottom of the Telephone 
 Fig. 10-32   optiPoint 410, 420, 410 S, 420 S - Connection Options
 

 Table 10-4   optiPoint 410/420, optiPoint 410 S/420 S - Description of Ports
 No.  
 Port  
 1  
Ethernet (10/100BaseT) interface (self-configuring) for the LAN  
 2  
Handset  
 3  
Local power supply (optional)1  
 4  
Key module  
 5  
Ethernet (10/100BaseT) interface (self-configuring) for the PC  
 6  
Headset (121 TR 9-5)  
 7  
Adapter 1  
 8  
Adapter 2  
 9  
USB interface  
1No local power supply is required if power is provided via the Ethernet cable (Power over LAN).

HiPath 3000/5000 V8, Service Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3580S100017620   2011-01-24