2.4  
Static Configuration Rules 
 

2.4.1  
Resources and Capacity Limits 
 
For information on the configuration of HG 1500 boards, refer to the HG 1500 Administration Manual.  
With HiPath 3000/5000, HG 1500 provides the resources listed in Table 2-7 via the HG 1500 boards defined as media gateways (= gateway HG 1500).
Table 2-8 shows the board-specific capacity limits (maximum configuration) for the corresponding functions.

 Table 2-7   Technical Specifications (Resources) of the HG 1500 Boards Defined as Media Gateways
 Resource  
 HXGM3  
 HXGS3  
 HXGR3  
 STMI2  
 without PDM1  
 with 1 x PDM1  
 with 2 x PDM1  
 without PDM1  
 with 1 x PDM1  
   
Routing channels  
A routing channel is required, for example, for making connections between two IP networks via ISDN (ISDN routing).  
 16  
 16  
 16  
Gateway channels (DSP channels)  
A gateway channel is required, for example, to connect an IP workpoint client and a TDM workpoint client (for example, optiPoint 500).  
 16  
 24  
 32  
 8  
 16  
 32  
Fax/modem channels (G.711)  
 16  
 24  
 32  
 8  
 16  
 32  
Fax channels (T.38)  
These are special hardware resources which facilitate fax via vCAPI and fax via IP functionality with the T.38 protocol.  
 3  
 2  
 3  
Teleworker with AES encryption and codec G.711/G.729 (Sample rate 20 ms)  
 10  
 8  
 10  
Teleworker with AES encryption and codec G.723 (sample rate 30 msec)  
 16  
 12  
 16  
DMC channels  
These are the gateway channels for Direct Media Connection (DMC) with HiPath 4000 (DMC interworking feature is active).1).  
 12  
 18  
 24  
 6  
 12  
 24  
MOH Channels (G.711, G.723, G.729)  
The number of MOH channels used depends on the configuration (HiPath 3000/5000 Manager E).  
 5  
 5  
 5  
LAN connections  
Number of LAN connections that can be used as DSL connections.  
 2  
 1  
 2  
 1  
 2  
 1  
1The number of gateway channels available (DSP channels) is reduced as soon as the DMC interworking feature is activated with HiPath 3000/5000 Manager E.

 Table 2-8   HG 1500 - Board-Specific Capacity Limits (Maximum Configuration)
 Function  
 HXGM3  
 HXGS3  
 HXGR3  
 STMI2  
 without PDM1  
 with 1 x PDM1  
 with 2 x PDM1  
 without PDM1  
 with 1 x PDM1  
   
PPP Routing Partner  
 70  
 70  
 70  
vCAPI clients  
IP workpoint clients that support vCAPI.  
 100  
 100  
 100  
MOH data streams  
 10  
 10  
 10  

HiPath 3000/5000 V8, Service Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3580S100017620   2011-01-24