Since the system software no longer provides all languages, some systems no longer start up in the customary local language after the country code is entered. You must now load the local language prior to country initialization, using HiPath 3000/5000 Manager E (see information on multilingual text output in the Feature Description HiPath 3000/5000).   After carrying out the country initialization, but before loading the required local language, the displays come up in German.

Table 5-3

Entering the Country Code and Selecting the Password Type

Step	Input	Description
1.	*95	Start system administration
2.	31994	Default user name
3.	31994	Default password
4.	XXXXX	You are prompted to enter a new password (max. 15 digits)
5.	XXXXX	You are prompted to confirm the password entered in the previous step.
6.	29-5	Country initialization
7.	X	You are prompted to select the password type:   1 = Variable password   2 = Fixed password
8.	XX	You are prompted to enter the country code (see Page A-25). The system then boots up with the country-specific default information.
Notes:    •   On step 4 and step 5: If a new password is issued, both steps are omitted when calling the system again.  •   On step 6: No country adjustment is necessary for Germany because the system starts up with German codes.    •   On step 7: When selecting the fixed password, the default password (31994) overwrites the new password entered in step 4.

For Brazil only: CO call privileges, ringback protection per trunk   If the system was initialized with the country code for Brazil, the option for saving the digits dialed and transmitting them via the system (dial rule 1A) is not activated.   This can lead to dialing problems at DTMF terminals because the system waits for the dial tone from the analog trunk and does not set up the connection between the DTMF terminal and the trunk until it recognizes the dial tone. Digits dialed before dial tone recognition are therefore not recognized by the CO. This in turn can impact CO call privileges.   To avoid this, Least Cost Routing LCR should be activated for all systems with the country code for Brazil and with connection to analog trunks with DTMF signaling.

After you enter a country code, the default data is only guaranteed to load correctly if the system software has been officially released for that country.