12.3 |
Correcting Errors |
12.3.1 |
Automatic Error Correction |
| One of the below recovery actions is assigned to each error in the error memory. These recovery actions are programmed to automatically correct errors that occur. |
| • | Hard restart |
| • | Reload board |
| • | Reload CDB backup |
| • | Port lockout |
| • | Power failure transfer (loop start) |
| • | None |
| A watchdog activates continuous loops. |
| If no recovery measure is assigned or if the one that is assigned fails, a service technician has to correct the error manually. |
| HiPath 3000/5000 V8, Service Documentation, Issue 10 | up |
|
|
||
| Disclaimer & Copyright | ID: P31003H3580S100017620 | 2011-01-24 |