Table D-3

Nominal Output of the HiPath 3550 Power Supply Units

Power Supply Unit	Part Number	Max. Nominal Output in W
		5 V	-48 V
UPSC-D	S30122-K5660-A300   S30122-K5660-M300	40.0	53.0
Powerbox PB3000 with LUNA2	S30177-U773-X with S30122-K7686-M1	-	110

You must check whether the total power requirement of the boards used and the workpoint clients connected exceeds the maximum possible output of the UPSC-D with or without Powerbox PB3000. Section D.7 "Checking Whether the Output of a Power Supply Unit is Sufficient" contains a sample calculation.

Table D-4

Board Power RequirementHiPath 3550

Board or Component	Part Number	Net Power Requirement in W
		5 V	-48 V
BS3/1	S30807-H5482-X	-	2.0
BS3/3	S30807-H5485-X	-	3.0
CBCC (including subboards)	S30810-Q2935-A301	7.0	0.5
GEE12	S30817-Q951-Axxx	0.5	-
GEE16	S30817-Q951-Axxx	0.5	-
GEE50	S30817-Q951-Axxx	0.5	-
HXGS3 (including ventilator kit)	S30810-Q2943-X	10.0	2.8
HXGS3 (excluding ventilator kit)	S30810-Q2943-X	10.0	-
IVMS8	S30122-Q7379-X	2.6	0.3
PDM1	S30807-Q5692-X100	-	5.0
SLA8N	S30810-Q2929-X200	0.2	0.5
SLA16N	S30810-Q2929-X100	3.0	3.0
SLA24N	S30810-Q2929-X	4.5	4.5
SLAD4	S30810-H2956-X100	2.0	1.0
SLAD8	S30810-H2956-X200	2.0	1.0
SLAD16	S30810-Q2957-X	2,5	1,51
SLC16N	S30810-Q2193-X100	5.0	-
SLMO24	S30810-Q2901-X	1.5	-
SLU8	S30817-Q922-A301	0.8	-
STLS2	S30817-Q924-B313	0.6	-
STLS4	S30817-Q924-A313	1.0	-
STRB	S30817-Q932-A	0.5	-
TCAS-2	S30810-Q2945-X	4.5	-
TLA2	S30817-Q923-Bxxx	0.1	-
TLA4	S30817-Q923-Axxx	0.2	-
TLA8	S30817-Q926-Axxx	0.4	-
TMAMF	S30810-Q2587-A400	1.82	16.92
TMCAS	S30810-Q2938-X
TMGL4	S30810-Q2918-X	4.72	0.12
TMQ4	S30810-Q2917-X	3.8	-
TST1	S30810-Q2919-X	0.8	-
TS2	S30810-Q2913-X300	0.9	-
V24/1	S30807-Q6916-X100	0.3	-
4SLA	S30810-Q2923-X200	0.7	0.7
8SLA	S30810-Q2923-X100	1.3	1.3
16SLA	S30810-Q2923-X	2.5	2.5

1For each active station (off hook), the net resource requirement increases by approx. 1.6 W (dependant on the phone's cable length and DC resistance). 2Identified at a traffic flow of 0.8 Erlang