<?xml version='1.0' encoding='ISO-8859-1' ?>

<WebWorksHelpTOC version="3.0">
<i l="wwh3master.html" t="HiPath 3000/5000 V8, Service Documentation, Issue 10" />
 <i l="inform.html#wp720" t="1 Introduction and Important Notes
">
  <i l="inform2.html#wp18754" t="1.1 Product Overview
" />
  <i l="inform3.html#wp18760" t="1.2 Target Group and Prerequisites
" />
  <i l="inform4.html#wp18768" t="1.3 Using this Manual
">
   <i l="inform5.html#wp18778" t="1.3.1 Structure
" />
   <i l="inform6.html#wp18779" t="1.3.2 Reference Manuals
" />
   <i l="inform7.html#wp18790" t="1.3.3 Notational Conventions Used
" />
  </i>
  <i l="inform8.html#wp20166" t="1.4 Safety Information and Warnings
">
   <i l="inform9.html#wp4491" t="1.4.1 Warning Sign: DANGER
" />
   <i l="inform10.html#wp4507" t="1.4.2 Warning Sign: WARNING
" />
   <i l="inform11.html#wp4518" t="1.4.3 Warning Sign: CAUTION
" />
   <i l="inform12.html#wp21487" t="1.4.4 Safety Information for Australia (for Australia only)
" />
   <i l="inform13.html#wp21520" t="1.4.5 Safety Information for Brazil (for Brazil only)
" />
   <i l="inform14.html#wp4529" t="1.4.6 Notes
" />
  </i>
  <i l="inform15.html#wp4544" t="1.5 Emergencies
" />
  <i l="inform16.html#wp4560" t="1.6 Reporting Accidents
" />
  <i l="inform17.html#wp20989" t="1.7 Correct Disposal and Recycling
" />
  <i l="inform18.html#wp21118" t="1.8 Standards and Guidelines for Installation
">
   <i l="inform18.html#wp21120" t="1.8.1 Connection to the Power Circuit
" />
   <i l="inform19.html#wp21123" t="1.8.2 Fire Safety Requirements
" />
   <i l="inform20.html#wp21150" t="1.8.3 Shielded Cables for LAN, WAN and DMZ Connections
" />
   <i l="inform21.html#wp23628" t="1.8.4 Lightning Protection
" />
   <i l="inform22.html#wp21292" t="1.8.5 Markings
" />
  </i>
  <i l="inform23.html#wp16230" t="1.9 Privacy and Data Security
" />
  <i l="inform24.html#wp23777" t="1.10 Information on the Intranet
" />
  <i l="inform25.html#wp23771" t="1.11 Feedback on the Documentation
" />
 </i>
 <i l="sysdat.html#wp228845" t="2 System Data
">
  <i l="sysdat2.html#wp233605" t="2.1 HiPath 3000
">
   <i l="sysdat2.html#wp233609" t="2.1.1 Electrical Environment
" />
   <i l="sysdat3.html#wp233619" t="2.1.2 Lightning Protection
" />
   <i l="sysdat4.html#wp233647" t="2.1.3 Individual HiPath 3000 System Models
" />
   <i l="sysdat5.html#wp177303" t="2.1.4 Design and Dimensions of the HiPath 3000 Systems
">
    <i l="sysdat5.html#wp85325" t="2.1.4.1 Design and Dimensions of HiPath 3800
" />
    <i l="sysdat5.html#wp53519" t="2.1.4.2 Design and Dimensions of HiPath 3550
" />
    <i l="sysdat5.html#wp53615" t="2.1.4.3 Design and Dimensions of HiPath 3350
" />
    <i l="sysdat5.html#wp53900" t="2.1.4.4 Design and Dimensions of HiPath 3500
" />
    <i l="sysdat5.html#wp53964" t="2.1.4.5 Design and Dimensions of HiPath 3300
" />
   </i>
   <i l="sysdat6.html#wp54022" t="2.1.5 System Environment of the HiPath 3000 Systems
">
    <i l="sysdat6.html#wp225437" t="2.1.5.1 System Environment HiPath 3800
" />
    <i l="sysdat6.html#wp225701" t="2.1.5.2 System Environment HiPath 3550
" />
    <i l="sysdat6.html#wp221447" t="2.1.5.3 System Environment HiPath 3350
" />
    <i l="sysdat6.html#wp221866" t="2.1.5.4 System Environment HiPath 3500
" />
    <i l="sysdat6.html#wp222173" t="2.1.5.5 System Environment HiPath 3300
" />
   </i>
  </i>
  <i l="sysdat7.html#wp57821" t="2.2 HiPath 5000
" />
  <i l="sysdat8.html#wp222201" t="2.3 System-Specific Capacity Limits for HiPath 3000, HiPath 5000
" />
  <i l="sysdat9.html#wp113455" t="2.4 Static Configuration Rules
">
   <i l="sysdat9.html#wp217987" t="2.4.1 Resources and Capacity Limits
" />
   <i l="sysdat10.html#wp229622" t="2.4.2 Gateway Channels (DSP Channels)
" />
   <i l="sysdat11.html#wp234652" t="2.4.3 Connections to ITSP
" />
   <i l="sysdat12.html#wp113936" t="2.4.4 MOH Channels (G.711, G.723, G.729)
" />
   <i l="sysdat13.html#wp113949" t="2.4.5 IP Networking Channels (PBX Networking Channels)
" />
   <i l="sysdat14.html#wp113980" t="2.4.6 Bandwidth Control for IP Networking Channels (PBX Networking Channels)
" />
   <i l="sysdat15.html#wp113989" t="2.4.7 DMC (Direct Media Connection) Channels
" />
   <i l="sysdat16.html#wp114003" t="2.4.8 ISDN Routing/PPP Channels
" />
   <i l="sysdat17.html#wp177342" t="2.4.9 Fax/Modem Channels
" />
  </i>
  <i l="sysdat18.html#wp223740" t="2.5 Dynamic Configuration Rules 
">
   <i l="sysdat19.html#wp223749" t="2.5.1 Dynamic Performance Characteristics
" />
   <i l="sysdat20.html#wp223821" t="2.5.2 Thumb Rule for HiPath 3000/5000 V8
">
    <i l="sysdat20.html#wp117843" t="2.5.2.1 Procedural Principles
" />
    <i l="sysdat20.html#wp117874" t="2.5.2.2 Planning Load for HiPath Systems
" />
    <i l="sysdat20.html#wp117946" t="2.5.2.3 Maximum Permissible Values for HiPath 3000/5000 V8
" />
    <i l="sysdat20.html#wp118012" t="2.5.2.4 Additional Parameters
" />
    <i l="sysdat20.html#wp118097" t="2.5.2.5 Current Thumb Rule Values
" />
   </i>
   <i l="sysdat21.html#wp118433" t="2.5.3 Thumb Rule for HG 1500 V3.0
">
    <i l="sysdat21.html#wp118434" t="2.5.3.1 Procedural Principles
" />
    <i l="sysdat21.html#wp118444" t="2.5.3.2 Maximum Permissible Values for HG 1500 V3.0
" />
    <i l="sysdat21.html#wp118487" t="2.5.3.3 Current Thumb Rule Values
" />
   </i>
   <i l="sysdat22.html#wp234734" t="2.5.4 Example of Application of Thumb Rule
">
    <i l="sysdat22.html#wp223909" t="2.5.4.1 HiPath 3000/5000 V8 Configuration
" />
    <i l="sysdat22.html#wp119172" t="2.5.4.2 HG 1500 Configurations
">
     <i l="sysdat22.html#wp119173" t="2.5.4.2.1 IP Trunking with TDM Terminal Points Only
" />
     <i l="sysdat22.html#wp119293" t="2.5.4.2.2 IP Trunking and HFA Clients
" />
     <i l="sysdat22.html#wp119612" t="2.5.4.2.3 IP Trunking via LAN and WAN (ISDN/PPP)
" />
     <i l="sysdat22.html#wp119775" t="2.5.4.2.4 IP Trunking with VPN (Voice Only)
" />
     <i l="sysdat22.html#wp120037" t="2.5.4.2.5 Standalone System with Home Offices connected via VPN
" />
     <i l="sysdat22.html#wp120190" t="2.5.4.2.6 VPN Networking with Data and Voice Connections
" />
     <i l="sysdat22.html#wp234739" t="2.5.4.2.7 IP terminals/clients for ISDN and ITSP connection in HiPath 3800
" />
    </i>
   </i>
   <i l="sysdat23.html#wp132443" t="2.5.5 Maximum Number of Devices for Special Cases
" />
  </i>
  <i l="sysdat24.html#wp74815" t="2.6 Technical Specifications for HiPath 3000
" />
  <i l="sysdat25.html#wp56520" t="2.7 Interface-to-Interface Ranges
" />
  <i l="sysdat26.html#wp228175" t="2.8 Country-Specific Ring Frequencies for Analog Subscriber Line Modules
" />
  <i l="sysdat27.html#wp218250" t="2.9 Numbering Plan
">
   <i l="sysdat27.html#wp218251" t="2.9.1 Default Numbering for HiPath 3000/5000
" />
   <i l="sysdat28.html#wp121418" t="2.9.2 Internet Telephony Phone Numbers
" />
   <i l="sysdat29.html#wp218489" t="2.9.3 Numbering in Networked Systems
" />
  </i>
  <i l="sysdat30.html#wp104194" t="2.10 Technical Specifications and Compliance to HiPath 3000
">
   <i l="sysdat30.html#wp61655" t="2.10.1 CE Compliance (not for U.S.)
" />
   <i l="sysdat31.html#wp94551" t="2.10.2 Compliance with US and Canadian Standards (for U.S. and Canada only)
">
    <i l="sysdat31.html#wp95150" t="2.10.2.1 FCC Compliance
">
     <i l="sysdat31.html#wp95151" t="2.10.2.1.1 FCC Rules, Part 15
" />
     <i l="sysdat31.html#wp95164" t="2.10.2.1.2 FCC Rules, Part 68
" />
    </i>
    <i l="sysdat31.html#wp95200" t="2.10.2.2 Industry Canada Compliance
">
     <i l="sysdat31.html#wp95455" t="2.10.2.2.1 REN
" />
     <i l="sysdat31.html#wp95204" t="2.10.2.2.2 Equipment Attachment Limitations
" />
    </i>
   </i>
   <i l="sysdat32.html#wp56877" t="2.10.3 SAFETY International
" />
  </i>
  <i l="sysdat33.html#wp56881" t="2.11 Environmental Conditions
">
   <i l="sysdat33.html#wp94432" t="2.11.1 Electrical Operating Conditions
" />
   <i l="sysdat34.html#wp94448" t="2.11.2 Mechanical Operating Conditions
" />
  </i>
 </i>
 <i l="boards.html#wp161872" t="3 Boards for HiPath 3000
">
  <i l="boards2.html#wp816997" t="3.1 Functional and Model Overview of the Boards
" />
  <i l="boards3.html#wp831671" t="3.2 Central boards
">
   <i l="boards4.html#wp831811" t="3.2.1 CBCC
" />
   <i l="boards5.html#wp831856" t="3.2.2 CBRC
" />
   <i l="boards6.html#wp832331" t="3.2.3 CBSAP
" />
   <i l="boards7.html#wp13661" t="3.2.4 CMA
" />
   <i l="boards8.html#wp13705" t="3.2.5 CMS
" />
   <i l="boards9.html#wp13865" t="3.2.6 CUC and CUCR
" />
   <i l="boards10.html#wp14020" t="3.2.7 CUP and CUPR
" />
   <i l="boards11.html#wp145178" t="3.2.8 DBSAP
" />
   <i l="boards12.html#wp145404" t="3.2.9 IMODN
" />
   <i l="boards13.html#wp14158" t="3.2.10 LIM
" />
   <i l="boards14.html#wp144036" t="3.2.11 LIMS
" />
   <i l="boards15.html#wp800268" t="3.2.12 LUNA2
" />
   <i l="boards16.html#wp822730" t="3.2.13 MMC
" />
   <i l="boards17.html#wp269976" t="3.2.14 PSUP
" />
   <i l="boards18.html#wp280897" t="3.2.15 RGMOD (for selected countries only)
" />
   <i l="boards19.html#wp151275" t="3.2.16 UPSC-D
" />
   <i l="boards20.html#wp813565" t="3.2.17 UPSC-DR
" />
  </i>
  <i l="boards21.html#wp813859" t="3.3 Peripheral Boards
">
   <i l="boards22.html#wp150984" t="3.3.1 DIU2U (for U.S. only)
" />
   <i l="boards23.html#wp150635" t="3.3.2 DIUN2
" />
   <i l="boards24.html#wp814150" t="3.3.3 DIUT2
" />
   <i l="boards25.html#wp136121" t="3.3.4 HXGS3, HXGR3
" />
   <i l="boards26.html#wp151146" t="3.3.5 VMNL, IVMN8
" />
   <i l="boards27.html#wp331065" t="3.3.6 IVMP4, IVMP4R
" />
   <i l="boards28.html#wp332252" t="3.3.7 IVMP8 (not for U.S.) and IVMP8R (not for U.S.)
" />
   <i l="boards29.html#wp332700" t="3.3.8 IVMS8, IVMS8R
" />
   <i l="boards30.html#wp331437" t="3.3.9 IVMS8N, IVMS8NR
" />
   <i l="boards31.html#wp268200" t="3.3.10 PBXXX (for selected countries only)
" />
   <i l="boards32.html#wp832384" t="3.3.11 SLA8N (not for U.S.), SLA16N, SLA24N
" />
   <i l="boards33.html#wp832403" t="3.3.12 SLAD4, SLAD8, SLAD8R
" />
   <i l="boards34.html#wp823875" t="3.3.13 SLAD16
" />
   <i l="boards35.html#wp824436" t="3.3.14 SLC16N (not for U.S.)
" />
   <i l="boards36.html#wp24574" t="3.3.15 SLCN (not for U.S.)
" />
   <i l="boards37.html#wp326529" t="3.3.16 SLMAE8, SLMAE (SLMAE200)
" />
   <i l="boards38.html#wp824528" t="3.3.17 SLMA (SLMA24), SLMA8
" />
   <i l="boards39.html#wp832596" t="3.3.18 SLMA2 (for selected countries only)
" />
   <i l="boards40.html#wp832611" t="3.3.19 SLMAV
" />
   <i l="boards41.html#wp835954" t="3.3.20 SLMO2, SLMO8
" />
   <i l="boards42.html#wp153176" t="3.3.21 SLMO8 (not for U.S.), SLMO24
" />
   <i l="boards43.html#wp26196" t="3.3.22 SLU8
" />
   <i l="boards44.html#wp26315" t="3.3.23 SLU8R
" />
   <i l="boards45.html#wp836190" t="3.3.24 STLS2 (not for U.S.), STLS4
" />
   <i l="boards46.html#wp26682" t="3.3.25 STLS4R
" />
   <i l="boards47.html#wp250714" t="3.3.26 STLSX2, STLSX4, STLSX4R
" />
   <i l="boards48.html#wp26941" t="3.3.27 STMD3
" />
   <i l="boards49.html#wp160191" t="3.3.28 STMI2
" />
   <i l="boards50.html#wp287270" t="3.3.29 TCAS-2 and TCASR-2 (for selected countries only)
" />
   <i l="boards51.html#wp836459" t="3.3.30 TLA2 (Not for U.S.), TLA4 (Not for U.S.), TLA8 (not for U.S.)
" />
   <i l="boards52.html#wp32122" t="3.3.31 TLA4R (not for U.S.)
" />
   <i l="boards53.html#wp375139" t="3.3.32 TM2LP
" />
   <i l="boards54.html#wp788480" t="3.3.33 TMAMF (for selected countries only)
" />
   <i l="boards55.html#wp806490" t="3.3.34 TLANI2, TLANI4, TLANI8
" />
   <i l="boards56.html#wp806836" t="3.3.35 TLANI4R
" />
   <i l="boards57.html#wp839673" t="3.3.36 TMANI, TMANI-IM, TMANI-BRA [TMANI8]
" />
   <i l="boards58.html#wp154335" t="3.3.37 TMC16 (for selected countries only)
" />
   <i l="boards59.html#wp207039" t="3.3.38 TMCAS (for selected countries only)
" />
   <i l="boards60.html#wp288482" t="3.3.39 TMCAS-2 (for selected countries only)
" />
   <i l="boards61.html#wp102811" t="3.3.40 TMDID (for U.S. only)
" />
   <i l="boards62.html#wp324330" t="3.3.41 TMDID2 (for selected countries only)
" />
   <i l="boards63.html#wp836847" t="3.3.42 TMEW2
" />
   <i l="boards64.html#wp155186" t="3.3.43 TMGL4 (for U.S. only)
" />
   <i l="boards65.html#wp103566" t="3.3.44 TMGL4R (for U.S. only)
" />
   <i l="boards66.html#wp155922" t="3.3.45 TMQ4 (for U.S. only)
" />
   <i l="boards67.html#wp836980" t="3.3.46 TST1 (for U.S. only)
" />
   <i l="boards68.html#wp837159" t="3.3.47 TS2 (Not for U.S.), TS2R (not for U.S.)
" />
   <i l="boards69.html#wp38664" t="3.3.48 4SLA (not for U.S.), 8SLA, 16SLA (Not for U.S.)
" />
   <i l="boards70.html#wp38952" t="3.3.49 8SLAR
" />
  </i>
  <i l="boards71.html#wp815939" t="3.4 Options
">
   <i l="boards72.html#wp39251" t="3.4.1 ALUM4
" />
   <i l="boards73.html#wp199607" t="3.4.2 AMOM
" />
   <i l="boards74.html#wp39545" t="3.4.3 ANI4 (for selected countries only)
" />
   <i l="boards75.html#wp837262" t="3.4.4 ANI4R (for selected countries only)
" />
   <i l="boards76.html#wp107318" t="3.4.5 Announcement and Music Modules
" />
   <i l="boards77.html#wp377572" t="3.4.6 EVM
" />
   <i l="boards78.html#wp837575" t="3.4.7 EXMNA (for U.S. only)
" />
   <i l="boards79.html#wp796239" t="3.4.8 GEE12 (not for U.S.), GEE16 (not for U.S.), GEE50 (not for U.S.)
" />
   <i l="boards80.html#wp107705" t="3.4.9 HOPE (for U.S. only)
" />
   <i l="boards81.html#wp251484" t="3.4.10 OPAL and OPALR
" />
   <i l="boards82.html#wp40464" t="3.4.11 PFT1 (not for U.S.), PFT4 (not for U.S.)
" />
   <i l="boards83.html#wp145749" t="3.4.12 REALS
" />
   <i l="boards84.html#wp42223" t="3.4.13 STBG4 (for France only)
" />
   <i l="boards85.html#wp42364" t="3.4.14 STRB, STRBR
" />
   <i l="boards86.html#wp286935" t="3.4.15 USB V.24 Adapter
" />
   <i l="boards87.html#wp43095" t="3.4.16 V24/1 (not for U.S.)
" />
   <i l="boards88.html#wp43354" t="3.4.17 V.24 Adapter
" />
   <i l="boards89.html#wp200001" t="3.4.18 V.24 Cable
" />
  </i>
 </i>
 <i l="inst_h3.html#wp234989" t="4 Installing HiPath 3000
">
  <i l="inst_h32.html#wp28912" t="4.1 Installing HiPath 3800
">
   <i l="inst_h32.html#wp28914" t="4.1.1 Installation Prerequisites
" />
   <i l="inst_h33.html#wp28954" t="4.1.2 Installation Procedure
" />
   <i l="inst_h34.html#wp81978" t="4.1.3 Installing HiPath 3800 (Standalone)
">
    <i l="inst_h34.html#wp29318" t="4.1.3.1 Selecting the Installation Site
">
     <i l="inst_h34.html#wp80135" t="4.1.3.1.1 For U.S. only: AC Outlet
" />
    </i>
    <i l="inst_h34.html#wp29340" t="4.1.3.2 Unpacking the Components
" />
    <i l="inst_h34.html#wp39580" t="4.1.3.3 Setting up the System Cabinets
">
     <i l="inst_h34.html#wp29903" t="4.1.3.3.1 Overview
" />
     <i l="inst_h34.html#wp29569" t="4.1.3.3.2 Setting Up a Single Cabinet
" />
     <i l="inst_h34.html#wp43561" t="4.1.3.3.3 Stacking Two Cabinets
" />
     <i l="inst_h34.html#wp33193" t="4.1.3.3.4 Setting Up a Two-Cabinet System Side by Side
" />
    </i>
    <i l="inst_h34.html#wp30810" t="4.1.3.4 Grounding the System
">
     <i l="inst_h34.html#wp80336" t="4.1.3.4.1 Not for U.S.: Grounding the System
" />
     <i l="inst_h34.html#wp238105" t="4.1.3.4.2 For U.S. only: Grounding the System
" />
    </i>
    <i l="inst_h34.html#wp31189" t="4.1.3.5 Checking the Grounding
" />
   </i>
   <i l="inst_h35.html#wp29253" t="4.1.4 Installing HiPath 3800 (19-Inch Cabinet)
">
    <i l="inst_h35.html#wp39634" t="4.1.4.1 Selecting the Installation Site
">
     <i l="inst_h35.html#wp80368" t="4.1.4.1.1 For U.S. only: AC Outlet
" />
    </i>
    <i l="inst_h35.html#wp78541" t="4.1.4.2 Unpacking the Components
" />
    <i l="inst_h35.html#wp39679" t="4.1.4.3 Mounting System Cabinets in the 19-Inch Cabinet
">
     <i l="inst_h35.html#wp43340" t="4.1.4.3.1 Introduction
" />
     <i l="inst_h35.html#wp39829" t="4.1.4.3.2 Mounting a System Cabinet using Support and Angle Brackets
" />
    </i>
    <i l="inst_h35.html#wp39959" t="4.1.4.4 Grounding the System
" />
    <i l="inst_h35.html#wp40299" t="4.1.4.5 Checking the Grounding
" />
   </i>
   <i l="inst_h36.html#wp91267" t="4.1.5 Installing Boards (Configuration Notes)
">
    <i l="inst_h36.html#wp93949" t="4.1.5.1 System Factory Default
" />
    <i l="inst_h36.html#wp91278" t="4.1.5.2 Board Slots in the Basic and Expansion Cabinet
" />
    <i l="inst_h36.html#wp92125" t="4.1.5.3 Inserting or Removing Boards
" />
    <i l="inst_h36.html#wp91312" t="4.1.5.4 Mounting Connector Panels (if required)
" />
    <i l="inst_h36.html#wp92320" t="4.1.5.5 Installing the SIVAPAC-SIPAC Board Adapter
" />
    <i l="inst_h36.html#wp91661" t="4.1.5.6 Initializing the Boards
" />
    <i l="inst_h36.html#wp91826" t="4.1.5.7 Distribution of the PCM Highway
" />
    <i l="inst_h36.html#wp92005" t="4.1.5.8 Static Traffic Capacity
" />
   </i>
   <i l="inst_h37.html#wp44054" t="4.1.6 Connecting the Cable to the Backplane
">
    <i l="inst_h37.html#wp73812" t="4.1.6.1 Backplane of the Basic Cabinet
" />
    <i l="inst_h37.html#wp73968" t="4.1.6.2 Expansion Cabinet Backplane
" />
    <i l="inst_h37.html#wp77569" t="4.1.6.3 Connecting Cables Between the Basic and Expansion Cabinet
" />
    <i l="inst_h37.html#wp74128" t="4.1.6.4 Connecting Peripherals to the SIVAPAC Connector on the Backplane
" />
    <i l="inst_h37.html#wp76548" t="4.1.6.5 Connecting Peripherals to the Connector Panels with RJ45 Jacks
" />
    <i l="inst_h37.html#wp97339" t="4.1.6.6 Connecting Peripherals to the Connector Panels  with CHAMP Jack (for U.S. only)
" />
    <i l="inst_h37.html#wp74449" t="4.1.6.7 Connecting Peripherals to Connector Panels with SIPAC 1 SU Connectors
" />
   </i>
   <i l="inst_h38.html#wp54819" t="4.1.7 Using an External Main Distribution Frame or External Patch Panel
">
    <i l="inst_h38.html#wp55019" t="4.1.7.1 Using an External Main Distribution Frame MDFU-E S30805-U5283-X
">
     <i l="inst_h38.html#wp55028" t="4.1.7.1.1 Mounting the Main Distribution Frame (MDFU-E)
" />
     <i l="inst_h38.html#wp56508" t="4.1.7.1.2 Laying the Line Network and Jumpers on the MDFU-E
" />
    </i>
    <i l="inst_h38.html#wp41220" t="4.1.7.2 Inserting the External Patch Panel S30807K6143-X
">
     <i l="inst_h38.html#wp61199" t="4.1.7.2.1 Installing the Patch Panel in a 19-Inch Cabinet
" />
     <i l="inst_h38.html#wp59064" t="4.1.7.2.2 Connecting the Line Network to the External Patch Panel
" />
    </i>
    <i l="inst_h38.html#wp60369" t="4.1.7.3 Inserting External S0 Patch Panel C39104-Z7001-B3
">
     <i l="inst_h38.html#wp63095" t="4.1.7.3.1 Installing the S0 Patch Panel in the 19-Inch Cabinet
" />
     <i l="inst_h38.html#wp63290" t="4.1.7.3.2 Connecting Lines to the External S0 Patch Panel
" />
    </i>
    <i l="inst_h38.html#wp238352" t="4.1.7.4 For U.S. only: Connecting Network Facilities
" />
   </i>
   <i l="inst_h39.html#wp47351" t="4.1.8 Loading the System Software and Installing Subboards on the CBSAP
" />
   <i l="inst_h310.html#wp64713" t="4.1.9 Connecting Workpoint Clients
" />
   <i l="inst_h311.html#wp48472" t="4.1.10 Making Trunk and Networking Connections
" />
   <i l="inst_h312.html#wp48507" t="4.1.11 Performing a Visual Inspection
" />
  </i>
  <i l="inst_h313.html#wp16926" t="4.2 Installing HiPath 3550, HiPath 3350, HiPath 3500, and HiPath 3300
">
   <i l="inst_h313.html#wp16928" t="4.2.1 Installation Prerequisites
" />
   <i l="inst_h314.html#wp16972" t="4.2.2 Installation Procedure
" />
   <i l="inst_h315.html#wp17224" t="4.2.3 Installing HiPath 3550 and HiPath 3350
">
    <i l="inst_h315.html#wp17239" t="4.2.3.1 Selecting the Installation Site
">
     <i l="inst_h315.html#wp80971" t="4.2.3.1.1 For U.S. only: AC Outlet
" />
    </i>
    <i l="inst_h315.html#wp17270" t="4.2.3.2 Unpacking the Components
" />
    <i l="inst_h315.html#wp17302" t="4.2.3.3 Not for U.S.: Mounting the Main Distribution Frame (HiPath 3550 only)
" />
    <i l="inst_h315.html#wp17432" t="4.2.3.4 Removing the System Housing Cover
" />
    <i l="inst_h315.html#wp17480" t="4.2.3.5 Attaching the System to the Wall
" />
    <i l="inst_h315.html#wp238439" t="4.2.3.6 Grounding the System and the Main Distribution Frame
" />
    <i l="inst_h315.html#wp89285" t="4.2.3.7 Installing the Boards
" />
    <i l="inst_h315.html#wp17832" t="4.2.3.8 Laying the Line Network and Connection Cables
" />
    <i l="inst_h315.html#wp18485" t="4.2.3.9 Attaching Ferrite
" />
    <i l="inst_h315.html#wp18567" t="4.2.3.10 Configuration Notes
" />
    <i l="inst_h315.html#wp18900" t="4.2.3.11 Connecting Workpoint Clients
" />
    <i l="inst_h315.html#wp23503" t="4.2.3.12 Making Trunk Connections
" />
    <i l="inst_h315.html#wp18906" t="4.2.3.13 Performing a Visual Inspection
" />
   </i>
   <i l="inst_h316.html#wp234320" t="4.2.4 Installing HiPath 3500 and HiPath 3300 (19-Inch Housing)
">
    <i l="inst_h316.html#wp234349" t="4.2.4.1 Installation Versions
" />
    <i l="inst_h316.html#wp19015" t="4.2.4.2 Selecting the Installation Site
">
     <i l="inst_h316.html#wp81696" t="4.2.4.2.1 For U.S. only: AC Outlet
" />
    </i>
    <i l="inst_h316.html#wp19046" t="4.2.4.3 Unpacking the Components
" />
    <i l="inst_h316.html#wp19081" t="4.2.4.4 Not for U.S.: Attaching a HiPath 3500 and HiPath 3300 to the Wall
" />
    <i l="inst_h316.html#wp26558" t="4.2.4.5 Installing a HiPath 3500 or HiPath 3300 in a Cabinet
" />
    <i l="inst_h316.html#wp19245" t="4.2.4.6 Grounding the System
" />
    <i l="inst_h316.html#wp89529" t="4.2.4.7 Installing the Boards
" />
    <i l="inst_h316.html#wp234378" t="4.2.4.8 Connecting Cables and the Line Network
" />
    <i l="inst_h316.html#wp19499" t="4.2.4.9 Configuration Notes
" />
    <i l="inst_h316.html#wp19627" t="4.2.4.10 Connecting Workpoint Clients
" />
    <i l="inst_h316.html#wp23586" t="4.2.4.11 Making Trunk Connections
" />
    <i l="inst_h316.html#wp19633" t="4.2.4.12 Performing a Visual Inspection
" />
   </i>
  </i>
 </i>
 <i l="start_h3.html#wp25500" t="5 Starting Up HiPath 3000
">
  <i l="start_h32.html#wp13959" t="5.1 Starting Up HiPath 3800
">
   <i l="start_h33.html#wp13974" t="5.1.1 Startup Procedure
" />
   <i l="start_h34.html#wp14036" t="5.1.2 Supplying the System with Power
">
    <i l="start_h34.html#wp14117" t="5.1.2.1 Assigning Station Numbers
" />
   </i>
   <i l="start_h35.html#wp14178" t="5.1.3 Carrying Out a System Reload
" />
   <i l="start_h36.html#wp25303" t="5.1.4 Carrying Out the Country Initialization and Selecting the Password Type
" />
   <i l="start_h37.html#wp25389" t="5.1.5 Not for U.S.: Entering the System Number
" />
   <i l="start_h38.html#wp25395" t="5.1.6 Customer-Specific Programming
" />
   <i l="start_h39.html#wp25401" t="5.1.7 Performing a System Check
" />
  </i>
  <i l="start_h310.html#wp8577" t="5.2 Starting Up HiPath 3550, HiPath 3350, HiPath 3500, HiPath 3300
">
   <i l="start_h311.html#wp8624" t="5.2.1 Startup Procedure
" />
   <i l="start_h312.html#wp9946" t="5.2.2 Supplying the System With Power
">
    <i l="start_h312.html#wp10009" t="5.2.2.1 Assigning Station Numbers
" />
   </i>
   <i l="start_h313.html#wp8760" t="5.2.3 Carrying Out a System Reload
" />
   <i l="start_h314.html#wp8766" t="5.2.4 Carrying Out the Country Initialization and Selecting the Password Type
" />
   <i l="start_h315.html#wp8874" t="5.2.5 Not for U.S.: Entering the System Number
" />
   <i l="start_h316.html#wp13785" t="5.2.6 Customer-Specific Programming
" />
   <i l="start_h317.html#wp10934" t="5.2.7 Performing a System Check
" />
  </i>
 </i>
 <i l="start_h5.html#wp80216" t="6 HiPath 5000 Startup and Administration
">
  <i l="start_h52.html#wp22693" t="6.1 Introduction
" />
  <i l="start_h53.html#wp83516" t="6.2 Software Structure
" />
  <i l="start_h54.html#wp50555" t="6.3 Notes on Open Numbering in a HiPath 3000/5000 Network
" />
  <i l="start_h55.html#wp61714" t="6.4 Installation Requirements
" />
  <i l="start_h56.html#wp24211" t="6.5 HiPath 5000
">
   <i l="start_h56.html#wp22421" t="6.5.1 Preparing for Installation
" />
   <i l="start_h57.html#wp22451" t="6.5.2 Integrating the HiPath 5000 Server in the Customer LAN
" />
   <i l="start_h58.html#wp22733" t="6.5.3 HiPath 5000 Installing Standard Components
">
    <i l="start_h58.html#wp22734" t="6.5.3.1 Overview
" />
    <i l="start_h58.html#wp46945" t="6.5.3.2 Licensing
" />
    <i l="start_h58.html#wp22845" t="6.5.3.3 Starting the Installation
" />
   </i>
   <i l="start_h59.html#wp53218" t="6.5.4 Installing HiPath Fault Management
" />
   <i l="start_h510.html#wp56411" t="6.5.5 Installing the TAPI Service Provider
" />
   <i l="start_h511.html#wp52993" t="6.5.6 Installing the HiPath Inventory Server Separately
" />
   <i l="start_h512.html#wp48188" t="6.5.7 Verifying Installation
">
    <i l="start_h512.html#wp48209" t="6.5.7.1 Verifying the Start and Function of HiPath 5000 Services
" />
    <i l="start_h512.html#wp48212" t="6.5.7.2 Checking Entries in the Event Viewer
" />
   </i>
  </i>
  <i l="start_h513.html#wp60608" t="6.6 Modifying HiPath 5000 Components (Retro-Fitting, Updating, Deleting)
">
   <i l="start_h514.html#wp60662" t="6.6.1 Version-Wide Upgrading of a HiPath 5000 Installation
" />
  </i>
  <i l="start_h515.html#wp23487" t="6.7 Performing Licensing
" />
  <i l="start_h516.html#wp23711" t="6.8 Optimizing Operating System Settings
" />
  <i l="start_h517.html#wp48238" t="6.9 Perform HiPath 5000 Basic Configuration
">
   <i l="start_h518.html#wp54525" t="6.9.1 Configuring HiPath 5000 RSM as a Central Admin. Unit in an IP Network
">
    <i l="start_h518.html#wp55485" t="6.9.1.1 Creating a Central Customer Database for IP Networking
" />
    <i l="start_h518.html#wp55558" t="6.9.1.2 Adding Individual Nodes for IP Networking
" />
   </i>
  </i>
  <i l="start_h519.html#wp25249" t="6.10 GetAccount
">
   <i l="start_h520.html#wp25262" t="6.10.1 Parameters for Call Data Export
" />
  </i>
  <i l="start_h521.html#wp21763" t="6.11 Connecting an Uninterruptible Power Supply to HiPath 5000
" />
 </i>
 <i l="start_3g.html#wp21227" t="7 Starting HiPath 3000 as a Gateway
">
  <i l="start_3g2.html#wp14251" t="7.1 Starting HiPath 3800 as a Gateway
">
   <i l="start_3g2.html#wp14252" t="7.1.1 Prerequisites
" />
   <i l="start_3g3.html#wp14267" t="7.1.2 Procedure for Installation and Startup
" />
  </i>
  <i l="start_3g4.html#wp8021" t="7.2 Starting HiPath 3500 as a Gateway
">
   <i l="start_3g4.html#wp9891" t="7.2.1 Prerequisites
" />
   <i l="start_3g5.html#wp11540" t="7.2.2 Procedure for Installation and Startup
" />
  </i>
  <i l="start_3g6.html#wp13456" t="7.3 Starting HiPath 3300 as a Gateway
">
   <i l="start_3g6.html#wp13457" t="7.3.1 Prerequisites
" />
   <i l="start_3g7.html#wp13472" t="7.3.2 Procedure for Installation and Startup
" />
  </i>
 </i>
 <i l="licensing.html#wp1053738" t="8 Licensing
">
  <i l="licensing2.html#wp1051926" t="8.1 Licensing Fundamentals
" />
  <i l="licensing3.html#wp1016367" t="8.2 Licensing for HiPath 3000 V8, HiPath 5000 V8
">
   <i l="licensing3.html#wp1016369" t="8.2.1 Products and Components subject to Mandatory Licensing
" />
   <i l="licensing4.html#wp1054707" t="8.2.2 Grace Period
" />
   <i l="licensing5.html#wp1054468" t="8.2.3 License Failure Period
" />
   <i l="licensing6.html#wp1016680" t="8.2.4 Performing Licensing
" />
  </i>
  <i l="licensing7.html#wp1017031" t="8.3 Licensing Scenarios
">
   <i l="licensing8.html#wp1017049" t="8.3.1 HiPath 3000 as a Standalone System
" />
   <i l="licensing9.html#wp1017197" t="8.3.2 Networked HiPath 3000 Systems without HiPath 5000 RSM
" />
   <i l="licensing10.html#wp1017210" t="8.3.3 Networked HiPath 3000 Systems with HiPath 5000 RSM
" />
   <i l="licensing11.html#wp1025105" t="8.3.4 Upgrading to HiPath 3000 V8, HiPath 5000 V8
" />
   <i l="licensing12.html#wp1052587" t="8.3.5 Merging Standalone Systems (HiPath 3000)  to Form a Network with HiPath 5000 RSM
" />
   <i l="licensing13.html#wp1017865" t="8.3.6 Removing a Standalone System from a Network with HiPath 5000 RSM
" />
   <i l="licensing14.html#wp1017876" t="8.3.7 Replacing License-sensitive Hardware (Changing the MAC Address)
" />
  </i>
  <i l="licensing15.html#wp1053584" t="8.4 Licensing optiClient Attendant (V8) at HiPath 3000 V8
" />
  <i l="licensing16.html#wp1019448" t="8.5 Protection Against License Manipulation
" />
 </i>
 <i l="exup.html#wp144251" t="9 Expanding and Upgrading HiPath 3000
">
  <i l="exup2.html#wp30560" t="9.1 HiPath 3000 Expanding
">
   <i l="exup3.html#wp34972" t="9.1.1 Replacing Peripheral Boards for HiPath 3800
" />
   <i l="exup4.html#wp53370" t="9.1.2 Connecting a Printer
" />
   <i l="exup5.html#wp121943" t="9.1.3 Inserting Powerbox PB3000
">
    <i l="exup5.html#wp121961" t="9.1.3.1 PB3000 Control, Display, and Connecting Elements
" />
    <i l="exup5.html#wp122121" t="9.1.3.2 Components
" />
    <i l="exup5.html#wp129617" t="9.1.3.3 Installation Options
" />
    <i l="exup5.html#wp141517" t="9.1.3.4 Technical Specifications
" />
    <i l="exup5.html#wp141782" t="9.1.3.5 UPS Bridging Time/Charging Time
" />
    <i l="exup5.html#wp131844" t="9.1.3.6 Powerbox PB3000 with Batteries and LUNA2
">
     <i l="exup5.html#wp141608" t="9.1.3.6.1 Installing Batteries in PB3000
" />
     <i l="exup5.html#wp141629" t="9.1.3.6.2 Installing the LUNA2 Power Supply in PB3000
" />
    </i>
    <i l="exup5.html#wp122449" t="9.1.3.7 Wall Mounting PB3000 (Not for USA)
" />
    <i l="exup5.html#wp141648" t="9.1.3.8 19-Inch Cabinet Installation for PB3000
" />
   </i>
   <i l="exup6.html#wp143025" t="9.1.4 Connecting Special Equipment
">
    <i l="exup6.html#wp143028" t="9.1.4.1 Entrance Telephones
">
     <i l="exup6.html#wp10797" t="9.1.4.1.1 Information on Third-Party Entrance Telephones
" />
    </i>
    <i l="exup6.html#wp8091" t="9.1.4.2 Connecting Speakers
" />
   </i>
  </i>
  <i l="exup7.html#wp141771" t="9.2 Upgrading HiPath 3000
">
   <i l="exup8.html#wp40316" t="9.2.1 Hardware Upgrade
" />
   <i l="exup9.html#wp35186" t="9.2.2 Software Upgrade
" />
   <i l="exup10.html#wp145104" t="9.2.3 Upgrading from V7 to V8
">
    <i l="exup10.html#wp145105" t="9.2.3.1 Introduction
" />
    <i l="exup10.html#wp58169" t="9.2.3.2 Upgrading a HiPath 3000 Standalone System
" />
    <i l="exup10.html#wp58205" t="9.2.3.3 Upgrading a HiPath 5000 RSM Network
" />
    <i l="exup10.html#wp58269" t="9.2.3.4 Upgrading a HiPath 3000 System with HiPath 2000/HiPath OpenOffice EE
" />
    <i l="exup10.html#wp58306" t="9.2.3.5 Upgrading a HiPath 3000 System Networked with HiPath 4000
" />
   </i>
   <i l="exup11.html#wp130910" t="9.2.4 Upgrade HiPath 3000 for Signalling &amp; Payload Encryption (SPE)
">
    <i l="exup11.html#wp130914" t="9.2.4.1 Upgrading
" />
    <i l="exup11.html#wp130923" t="9.2.4.2 Additional System Load
" />
   </i>
  </i>
 </i>
 <i l="wclient.html#wp316557" t="10 Workpoint Clients
">
  <i l="wclient2.html#wp319035" t="10.1 OpenStage Product Family
">
   <i l="wclient3.html#wp305923" t="10.1.1 Gigabit variant of OpenStage terminals
" />
   <i l="wclient4.html#wp122716" t="10.1.2 OpenStage Terminals
">
    <i l="wclient4.html#wp309426" t="10.1.2.1 OpenStage 10
" />
    <i l="wclient4.html#wp312134" t="10.1.2.2 OpenStage 15
" />
    <i l="wclient4.html#wp122719" t="10.1.2.3 OpenStage 20
" />
    <i l="wclient4.html#wp317048" t="10.1.2.4 OpenStage 30
" />
    <i l="wclient4.html#wp317133" t="10.1.2.5 OpenStage 40
" />
    <i l="wclient4.html#wp242410" t="10.1.2.6 OpenStage 60
" />
    <i l="wclient4.html#wp300642" t="10.1.2.7 OpenStage 80
" />
    <i l="wclient4.html#wp143184" t="10.1.2.8 Connection and Startup
" />
    <i l="wclient4.html#wp317457" t="10.1.2.9 Ports on the Underside of the Telephone for the CorNet-IP Model
" />
    <i l="wclient4.html#wp317493" t="10.1.2.10 Ports on the Underside of the Telephone for the TDM Model
" />
    <i l="wclient4.html#wp317527" t="10.1.2.11 OpenStage Terminals - Description of Ports
" />
   </i>
   <i l="wclient5.html#wp317739" t="10.1.3 OpenStage Add-On Devices
">
    <i l="wclient5.html#wp317749" t="10.1.3.1 OpenStage Key Module 15
" />
    <i l="wclient5.html#wp317763" t="10.1.3.2 OpenStage Key Module 40, 60, 80
" />
    <i l="wclient5.html#wp317774" t="10.1.3.3 OpenStage BLF
" />
    <i l="wclient5.html#wp317788" t="10.1.3.4 Possible Configurations for the Key Modules
" />
   </i>
   <i l="wclient6.html#wp317847" t="10.1.4 Powering the OpenStage Telephones, Add-On Devices, and Adapters
" />
   <i l="wclient7.html#wp123573" t="10.1.5 OpenStage Accessories
">
    <i l="wclient7.html#wp123575" t="10.1.5.1 External Power Supply
" />
    <i l="wclient7.html#wp304356" t="10.1.5.2 OpenStage PhoneAdapter
" />
    <i l="wclient7.html#wp123655" t="10.1.5.3 Headsets
" />
   </i>
   <i l="wclient8.html#wp143938" t="10.1.6 Updating Software for the OpenStage TDM Telephone Service
">
    <i l="wclient8.html#wp143939" t="10.1.6.1 Updating Software with Manager E (Manual, Automatic)
" />
    <i l="wclient8.html#wp313886" t="10.1.6.2 Updating Software Manually via a USB Stick
" />
    <i l="wclient8.html#wp143946" t="10.1.6.3 Accessing Hardware and Software Version Information
" />
    <i l="wclient8.html#wp143951" t="10.1.6.4 Accessing the Update Log File
" />
   </i>
  </i>
  <i l="wclient9.html#wp320036" t="10.2 optiPoint 410 / optiPoint 410 S and optiPoint 420 / optiPoint 420 S
">
   <i l="wclient10.html#wp81419" t="10.2.1 optiPoint 410 and optiPoint 410 S Telephones
">
    <i l="wclient10.html#wp81422" t="10.2.1.1 optiPoint 410 entry, optiPoint 410 entry S
" />
    <i l="wclient10.html#wp81476" t="10.2.1.2 optiPoint 410 economy, optiPoint 410 economy S
" />
    <i l="wclient10.html#wp86320" t="10.2.1.3 optiPoint 410 economy plus, optiPoint 410 economy plus S
" />
    <i l="wclient10.html#wp81549" t="10.2.1.4 optiPoint 410 standard, optiPoint 410 standard S
" />
    <i l="wclient10.html#wp81626" t="10.2.1.5 optiPoint 410 advance, optiPoint 410 advance S
" />
   </i>
   <i l="wclient11.html#wp81731" t="10.2.2 optiPoint 420 and optiPoint 420 S Telephones
">
    <i l="wclient11.html#wp81735" t="10.2.2.1 optiPoint 420 economy, optiPoint 420 economy S
" />
    <i l="wclient11.html#wp81808" t="10.2.2.2 optiPoint 420 economy plus, optiPoint 420 economy plus S
" />
    <i l="wclient11.html#wp81883" t="10.2.2.3 optiPoint 420 standard, optiPoint 420 standard S
" />
    <i l="wclient11.html#wp81960" t="10.2.2.4 optiPoint 420 advance, optiPoint 420 advance S
" />
   </i>
   <i l="wclient12.html#wp82066" t="10.2.3 Connection and Startup
">
    <i l="wclient12.html#wp82097" t="10.2.3.1 Ports on the Bottom of the Telephone
" />
   </i>
   <i l="wclient13.html#wp319171" t="10.2.4 Key Modules for optiPoint 410/410 S and 420/420 S
">
    <i l="wclient13.html#wp319182" t="10.2.4.1 optiPoint self labeling key module
" />
    <i l="wclient13.html#wp82209" t="10.2.4.2 optiPoint 410 display module
" />
    <i l="wclient13.html#wp82234" t="10.2.4.3 Possible Configurations for the Key Modules
" />
   </i>
   <i l="wclient14.html#wp82360" t="10.2.5 Use of optiPoint 500 Adapters
" />
  </i>
  <i l="wclient15.html#wp92408" t="10.3 Central Administration of IP Workpoints via the System
">
   <i l="wclient16.html#wp107630" t="10.3.1 Plug&amp;Play Startup of IP Workpoints
" />
   <i l="wclient17.html#wp107649" t="10.3.2 Software Upgrade of IP Workpoints via the System
" />
  </i>
  <i l="wclient18.html#wp10333" t="10.4 optiPoint 600 office
" />
  <i l="wclient19.html#wp89850" t="10.5 optiPoint 500
">
   <i l="wclient20.html#wp89872" t="10.5.1 optiPoint 500 Telephones
">
    <i l="wclient20.html#wp89875" t="10.5.1.1 optiPoint 500 entry
" />
    <i l="wclient20.html#wp89924" t="10.5.1.2 optiPoint 500 economy (not for U.S.)
" />
    <i l="wclient20.html#wp89991" t="10.5.1.3 optiPoint 500 basic
" />
    <i l="wclient20.html#wp90061" t="10.5.1.4 optiPoint 500 standard, optiPoint 500 standard SL (for U.S. only)
" />
    <i l="wclient20.html#wp90135" t="10.5.1.5 optiPoint 500 advance
" />
    <i l="wclient20.html#wp90238" t="10.5.1.6 Connection Requirements for HiPath 3000
" />
    <i l="wclient20.html#wp90331" t="10.5.1.7 Connection
" />
    <i l="wclient20.html#wp90391" t="10.5.1.8 Ports on the Bottom of the Telephone
" />
    <i l="wclient20.html#wp90430" t="10.5.1.9 USB 1.1 Interface
" />
   </i>
   <i l="wclient21.html#wp90462" t="10.5.2 optiPoint 500 Add-On Devices
">
    <i l="wclient21.html#wp90494" t="10.5.2.1 optiPoint key module
" />
    <i l="wclient21.html#wp90514" t="10.5.2.2 optiPoint BLF
" />
    <i l="wclient21.html#wp90571" t="10.5.2.3 Possible Configurations for the Key Modules
" />
   </i>
   <i l="wclient22.html#wp90680" t="10.5.3 optiPoint 500 Adapters
">
    <i l="wclient22.html#wp90715" t="10.5.3.1 optiPoint analog adapter
" />
    <i l="wclient22.html#wp90782" t="10.5.3.2 optiPoint ISDN adapter
" />
    <i l="wclient22.html#wp90858" t="10.5.3.3 optiPoint phone adapter
" />
    <i l="wclient22.html#wp91021" t="10.5.3.4 optiPoint acoustic adapter
" />
    <i l="wclient22.html#wp91255" t="10.5.3.5 optiPoint recorder adapter
" />
    <i l="wclient22.html#wp152109" t="10.5.3.6 Possible optiPoint Adapter Configurations
" />
   </i>
   <i l="wclient23.html#wp115059" t="10.5.4 optiPoint 500 key modules and adapters power supply
" />
   <i l="wclient24.html#wp301746" t="10.5.5 Maximum Configuration for UP0/E Workpoint Clients,  Add-On Devices and Adapters
" />
  </i>
  <i l="wclient25.html#wp313481" t="10.6 Key Programming
" />
  <i l="wclient26.html#wp313474" t="10.7 optiLog 4me
" />
  <i l="wclient27.html#wp82406" t="10.8 optiPoint Accessories
">
   <i l="wclient28.html#wp82411" t="10.8.1 External AC Adapters
">
    <i l="wclient28.html#wp82414" t="10.8.1.1 Local Power Supply for optiPoint 500, optiPoint 600 office
" />
    <i l="wclient28.html#wp82547" t="10.8.1.2 Power supply unit for optiPoint 410/410 S and 420/420 S
" />
   </i>
   <i l="wclient29.html#wp82610" t="10.8.2 Headsets
" />
  </i>
  <i l="wclient30.html#wp316235" t="10.9 OpenScape Personal Edition
" />
  <i l="wclient31.html#wp22829" t="10.10 HiPath AP 1120
" />
  <i l="wclient32.html#wp319743" t="10.11 optiPoint WL2 professional/optiPoint WL2 professional S
" />
  <i l="wclient33.html#wp319886" t="10.12 Attendant Console Versions
">
   <i l="wclient33.html#wp318181" t="10.12.1 OpenStage Attendant
" />
   <i l="wclient34.html#wp10938" t="10.12.2 optiPoint Attendant
" />
   <i l="wclient35.html#wp125659" t="10.12.3 optiClient Attendant V8
" />
  </i>
  <i l="wclient36.html#wp319937" t="10.13 Handsets for HiPath Cordless Office
">
   <i l="wclient37.html#wp319941" t="10.13.1 Gigaset SL3 professional
" />
   <i l="wclient38.html#wp319962" t="10.13.2 Gigaset S4 professional
" />
   <i l="wclient39.html#wp319983" t="10.13.3 Gigaset M2 professional
" />
   <i l="wclient40.html#wp320014" t="10.13.4 Logging Mobile Telephones on to the System
">
    <i l="wclient40.html#wp15523" t="10.13.4.1 Opening the HiPath 3000 Login Window
" />
    <i l="wclient40.html#wp28370" t="10.13.4.2 Logging On the Mobile Telephone
" />
    <i l="wclient40.html#wp28483" t="10.13.4.3 Checking the Login Status of the Mobile Telephones
" />
    <i l="wclient40.html#wp15818" t="10.13.4.4 Replacing, Locking, and Logging Off a Mobile Telephone
" />
   </i>
  </i>
  <i l="wclient41.html#wp11219" t="10.14 Analog Telephones for HiPath 3000
" />
  <i l="wclient42.html#wp11337" t="10.15 ISDN Terminals for HiPath 3000
" />
 </i>
 <i l="cordless.html#wp37919" t="11 HiPath Cordless Office
">
  <i l="cordless2.html#wp10617" t="11.1 Introduction
" />
  <i l="cordless3.html#wp14875" t="11.2 System Configuration
" />
  <i l="cordless4.html#wp18053" t="11.3 Technical Data for Base Stations
" />
  <i l="cordless5.html#wp37809" t="11.4 Power-Related Capacity Limits
" />
  <i l="cordless6.html#wp24302" t="11.5 Multi-SLC and System-Wide Networking
" />
  <i l="cordless7.html#wp27215" t="11.6 Planning Notes for Networked HiPath 3000 Systems Featuring  Network-Wide Roaming
" />
 </i>
 <i l="service.html#wp98138" t="12 Service
">
  <i l="service2.html#wp66325" t="12.1 Service and Maintenance Tasks
">
   <i l="service2.html#wp66871" t="12.1.1 Backing Up the Customer Database (CDB Backup)
">
    <i l="service2.html#wp66890" t="12.1.1.1 Customer Data Backup Without HiPath Software Manager
">
     <i l="service2.html#wp8172" t="12.1.1.1.1 Automatic Customer Data Backup
" />
     <i l="service2.html#wp66956" t="12.1.1.1.2 Manual Customer Data Backup with HiPath 3000
" />
    </i>
    <i l="service2.html#wp66987" t="12.1.1.2 Customer Data Backup with HiPath Software Manager
" />
    <i l="service2.html#wp8252" t="12.1.1.3 CDB Treatment When Replacing Central HiPath 3000 Hardware
" />
   </i>
   <i l="service3.html#wp36887" t="12.1.2 Effects of Hardware Changes on Customer Data
">
    <i l="service3.html#wp36909" t="12.1.2.1 Inserting and Removing HiPath 3000 Boards
" />
    <i l="service3.html#wp37058" t="12.1.2.2 Exchanging Workpoint Clients
" />
   </i>
   <i l="service4.html#wp8342" t="12.1.3 Relocate/Transfer Application Processor Software (APS)
">
    <i l="service4.html#wp67087" t="12.1.3.1 APS Replacement/Transfer for HiPath 3000 Systems Without  HiPath Software Manager
">
     <i l="service4.html#wp8345" t="12.1.3.1.1 Transferring an APS of HiPath 3000 by Replacing the MMC
" />
     <i l="service4.html#wp36362" t="12.1.3.1.2 APS Transfer
" />
    </i>
    <i l="service4.html#wp67118" t="12.1.3.2 APS Transfer for HiPath 3000 Systems With HiPath Software Manager
" />
   </i>
   <i l="service5.html#wp85194" t="12.1.4 Determine Ccurrent System Software Version
" />
   <i l="service6.html#wp61259" t="12.1.5 Upgrading HiPath 3000
" />
   <i l="service7.html#wp12315" t="12.1.6 Determining System Information and Installed Software Components (HiPath Inventory Manager)
" />
   <i l="service8.html#wp68109" t="12.1.7 Backing Up System Components (Backup Manager)
" />
   <i l="service9.html#wp80189" t="12.1.8 HiPath User Management
" />
  </i>
  <i l="service10.html#wp100005" t="12.2 Guided Maintenance
">
   <i l="service10.html#wp100007" t="12.2.1 Assessing Displays on the HG 1500 Front Panel
" />
   <i l="service11.html#wp100016" t="12.2.2 Recording HiPath 3000 Board Status
">
    <i l="service11.html#wp8745" t="12.2.2.1 Central Control Boards
" />
    <i l="service11.html#wp98066" t="12.2.2.2 Power Supplies
" />
    <i l="service11.html#wp98127" t="12.2.2.3 Peripheral Boards
" />
   </i>
   <i l="service12.html#wp100033" t="12.2.3 Recording HiPath 3000 Trunk Status
" />
   <i l="service13.html#wp100043" t="12.2.4 Recording Station Status
" />
   <i l="service14.html#wp100051" t="12.2.5 Recording the Status of the HiPath 3000 V.24 Interfaces
" />
   <i l="service15.html#wp100064" t="12.2.6 Trace Options for HiPath 3000
">
    <i l="service15.html#wp100073" t="12.2.6.1 Tracing ISDN Activities
" />
    <i l="service15.html#wp100078" t="12.2.6.2 Tracing Call-Specific Activities
" />
   </i>
   <i l="service16.html#wp100088" t="12.2.7 Trace Options and Evaluations in Connection with SRTP
" />
   <i l="service17.html#wp100104" t="12.2.8 Monitoring IP Data Packages with rpcap and Wireshark (Ethereal)
">
    <i l="service17.html#wp100410" t="12.2.8.1 Overview
" />
    <i l="service17.html#wp100416" t="12.2.8.2 Performing Monitoring
" />
   </i>
   <i l="service18.html#wp100137" t="12.2.9 HiPath Manager PCM Trace Monitor for HiPath 5000
">
    <i l="service18.html#wp69343" t="12.2.9.1 HiPath Manager PCM Trace Monitor Applications
" />
    <i l="service18.html#wp98182" t="12.2.9.2 Starting and Exiting the Trace Monitor
" />
    <i l="service18.html#wp69389" t="12.2.9.3 The Screen Layout of the Trace Monitor
" />
    <i l="service18.html#wp69535" t="12.2.9.4 General Functions
" />
    <i l="service18.html#wp78617" t="12.2.9.5 Exporting Trace Windows
" />
   </i>
   <i l="service19.html#wp100185" t="12.2.10 Eventlog for HiPath 3000
" />
   <i l="service20.html#wp97653" t="12.2.11 Testing Telephones
" />
   <i l="service21.html#wp12687" t="12.2.12 Event Viewer for HiPath 5000 (Eventlog)
" />
   <i l="service22.html#wp100201" t="12.2.13 HiPath Fault Management
" />
   <i l="service23.html#wp100211" t="12.2.14 Licensing Analysis
">
    <i l="service23.html#wp75622" t="12.2.14.1 Analysis Using Customer License Manager (CLM)
" />
    <i l="service23.html#wp75640" t="12.2.14.2 Analysis Using Customer License Agent (CLA)
" />
   </i>
   <i l="service24.html#wp100223" t="12.2.15 Analysis Using HiPath Software Manager and HiPath Inventory Manager
" />
   <i l="service25.html#wp54206" t="12.2.16 HiPath 3000 Error Messages (Entries in the Eventlog for HiPath 3000)
" />
   <i l="service26.html#wp35890" t="12.2.17 HiPath 5000 Error Messages (Event Viewer Entries for HiPath 5000)
" />
  </i>
  <i l="service27.html#wp10666" t="12.3 Correcting Errors
">
   <i l="service27.html#wp10667" t="12.3.1 Automatic Error Correction
" />
   <i l="service28.html#wp10680" t="12.3.2 Manual Error Correction Without HiPath 3000/5000 Manager E
" />
   <i l="service29.html#wp10693" t="12.3.3 Manual Error Correction With HiPath 3000/5000 Manager E
" />
  </i>
  <i l="service30.html#wp10719" t="12.4 Remote Service
">
   <i l="service31.html#wp71070" t="12.4.1 HiPath 3000 Connection Options
" />
   <i l="service32.html#wp63461" t="12.4.2 HiPath 5000 Connection Options
" />
   <i l="service33.html#wp10992" t="12.4.3 Remote System Administration
">
    <i l="service33.html#wp85625" t="12.4.3.1 Remote Administration of HiPath 3000 with  HiPath 3000/5000 Manager E
" />
    <i l="service33.html#wp11085" t="12.4.3.2 DTMF Remote Administration of HiPath 3000
" />
   </i>
   <i l="service34.html#wp11091" t="12.4.4 Remote Correction of System Software (APS)
" />
   <i l="service35.html#wp11097" t="12.4.5 Remote Error Signaling
" />
   <i l="service36.html#wp11109" t="12.4.6 Controlled Release of a Remote Connection
" />
   <i l="service37.html#wp11124" t="12.4.7 Remote Administration and Access Using PPP
">
    <i l="service37.html#wp39980" t="12.4.7.1 Remote System Administration
" />
    <i l="service37.html#wp39743" t="12.4.7.2 Remote Administration of Plus Products
" />
    <i l="service37.html#wp11152" t="12.4.7.3 Remote Error Signaling Using SNMP
" />
   </i>
  </i>
  <i l="service38.html#wp40051" t="12.5 Security Features
">
   <i l="service38.html#wp84413" t="12.5.1 Access Security
">
    <i l="service38.html#wp84415" t="12.5.1.1 User-Specific Logon for WBM
" />
    <i l="service38.html#wp84640" t="12.5.1.2 Password Protection against Brute Force Attacks
" />
    <i l="service38.html#wp11165" t="12.5.1.3 Logon With User Name and Password
" />
    <i l="service38.html#wp54276" t="12.5.1.4 Pre-Determined User Groups and Their Access Rights
" />
    <i l="service38.html#wp11602" t="12.5.1.5 System Access Options
" />
    <i l="service38.html#wp11656" t="12.5.1.6 Customer Data Security
" />
   </i>
   <i l="service39.html#wp11670" t="12.5.2 Automatic Logging of Administration Procedures
">
    <i l="service39.html#wp11677" t="12.5.2.1 Logging
">
     <i l="service39.html#wp11682" t="12.5.2.1.1 Format Identification and Command Entry
" />
    </i>
    <i l="service39.html#wp11739" t="12.5.2.2 Issuing and Saving Log Data
" />
   </i>
  </i>
 </i>
 <i l="ip_.html#wp15526" t="13 IP Fundamentals
">
  <i l="ip_2.html#wp11402" t="13.1 IP Network Requirements
">
   <i l="ip_3.html#wp8185" t="13.1.1 General Introduction
" />
   <i l="ip_4.html#wp8197" t="13.1.2 H.323 Protocol
" />
   <i l="ip_5.html#wp12525" t="13.1.3 Standards Supported
" />
   <i l="ip_6.html#wp11938" t="13.1.4 QoS - Quality of Service
" />
  </i>
  <i l="ip_7.html#wp9702" t="13.2 Network Analysis
" />
 </i>
 <i l="pcodes.html#wp8012" t="A System Programming Codes (Expert Mode Codes)
">
  <i l="pcodes.html#wp28923" t="A.1 Introduction
" />
  <i l="pcodes2.html#wp8746" t="A.2 Accessing System Administration
" />
 </i>
 <i l="fcodes.html#wp1003050" t="B Codes for Activating/Deactivating Features
" />
 <i l="portnos_V7.html#wp44508" t="C IP Protocols and Port Numbers Used with HiPath 3000/5000 V7 and Higher
" />
 <i l="power_calc.html#wp34872" t="D Identifying System Power Requirements
">
  <i l="power_calc2.html#wp45659" t="D.1 HiPath 3800 Board Power Requirement
" />
  <i l="power_calc3.html#wp35240" t="D.2 HiPath 3550 Board Power Requirement
" />
  <i l="power_calc4.html#wp59465" t="D.3 HiPath 3350 Board Power Requirement
" />
  <i l="power_calc5.html#wp57437" t="D.4 HiPath 3500 Board Power Requirement
" />
  <i l="power_calc6.html#wp38503" t="D.5 HiPath 3300 Board Power Requirement
" />
  <i l="power_calc7.html#wp55734" t="D.6 Workpoint Client, Add-On Device, and Adapter Power Requirements
" />
  <i l="power_calc8.html#wp38772" t="D.7 Checking Whether the Output of a Power Supply Unit is Sufficient
" />
  <i l="power_calc9.html#wp43070" t="D.8 Identifying the Primary System Power Requirement
" />
 </i>
 <i l="snmpd.html#wp48996" t="E Notes for Editing the File snmpd.cnf
">
  <i l="snmpd.html#wp49034" t="E.1 Introduction
" />
  <i l="snmpd2.html#wp49048" t="E.2 Trap Destination
" />
  <i l="snmpd3.html#wp49084" t="E.3 Community (Read/Write)
" />
  <i l="snmpd4.html#wp49093" t="E.4 Consequences for the File snmpd.cnf
" />
 </i>
 <i l="oso-components.html#wp50068" t="F Components of the Linux Server of OpenScape office HX
">
  <i l="oso-components2.html#wp50070" t="F.1 Postgres (Postmaster)
" />
  <i l="oso-components3.html#wp50097" t="F.2 File and Print Server
" />
  <i l="oso-components4.html#wp51373" t="F.3 Media Extension Bridge (MEB)
" />
  <i l="oso-components5.html#wp50247" t="F.4 CSTA Service Provider (CSP)
" />
  <i l="oso-components6.html#wp50274" t="F.5 OpenScapeOffice (OSO)
" />
  <i l="oso-components7.html#wp50349" t="F.6 Administration Portal
" />
  <i l="oso-components8.html#wp50412" t="F.7 Backup and Restore Engine
" />
 </i>
 <i l="country_versions.html#wp55261" t="G Country Versions
">
  <i l="country_versions.html#wp49339" t="G.1 Country Versions with Own Country Code
" />
  <i l="country_versions2.html#wp51371" t="G.2 Countries with Country Code &quot;IM&quot;
" />
 </i>
 <i l="hp3hp5shLOF.html#wp213" t="Figures
" />
 <i l="hp3hp5shLOT.html#wp219" t="Tables
" />
 <i l="hp3hp5shabb.html#wp141381" t="Abbreviations
" />
</WebWorksHelpTOC>
