3.3.44  
TMGL4R (for U.S. only) 
 
NOTE: Danger of damage to property due to surge voltage. The required lightning protection measures must be taken for this board, see Section 2.1.2 "Lightning Protection".  

Introduction  
A TMGL4R trunk module connects up to four analog ground-start or loop-start trunks to HiPath 3500 and HiPath 3300.
Ground start is the default.

Interfaces  
 Figure 3-123   TMGL4R (for U.S. only) (S30810-K2918-Z)
 
If ANI4R is installed as option 1 or 2, TMGL4R board must be inserted in slot 4, 6 or 8 (slots 6 and 8 are not available with HiPath 3300).  

Contact assignment  

 Table 3-168   TMGL4R (for U.S. only) - Contact Assignment
 Port  
 X3 Pin
(To GEE)  
 X4 Pin
(To trunks 1-4)  
 X5 Pin
(To ANI4R)  
 Signal  
 1  
 3  
 12  
 3  
 b-wire (ring), trunk 1  
 2  
 13  
 2  
 a-wire (tip), trunk 1  
 2  
 5  
 22  
 5  
 b-wire (ring), trunk 2  
 4  
 23  
 4  
 a-wire (tip), trunk 2  
 3  
 7  
 32  
 7  
 b-wire (ring), trunk 3  
 6  
 33  
 6  
 a-wire (tip), trunk 3  
 4  
 9  
 42  
 9  
 b-wire (ring), trunk 4  
 8  
 43  
 8  
 a-wire (tip), trunk 4  
 -  
 10  
 -  
 10  
 Call charging module assignment (GMZ)  

HiPath 3000/5000 V8, Service Documentation, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3580S100017620   2011-01-24