NOTE: All boards of HiPath 3550, HiPath 3350, HiPath 3500 and HiPath 3300 and the central boards of HiPath 3800 can only be pulled or inserted when the system has been powered down and de-energized.

NOTE: Danger of damage to property due to overvoltage. Lines exiting buildings of the boards listed below must be protected with an additional primary protection against overvoltage caused by lightening strikes (see also Section 2.1.2 "Lightning Protection").

•   CBCC, CBRC, CBSAP	•   STLSX2, STLSX4, STLSX4R	•   TMDID, TMDID2
•   SLA8N, SLA16N, SLA24N	•   STMD3, STMI2	•   TMEW2
•   SLAD4, SLAD8, SLAD8R	•   TCAS-2, TCASR-2	•   TMGL4, TMGL4R
•   SLAD16	•   TLA2, TLA4, TLA8, TLA4R	•   TMQ4, TST1
•   SLC16N, SLCN	•   TM2LP, TMAMF	•   TS2, TS2R
•   SLMAE8, SLMAE	•   TLANI2, TLANI4, TLANI8	•   4SLA, 8SLA, 16SLA
•   SLMA, SLMA8, SLMA2	•   TLANI4R	•   8SLAR
•   SLMO2, SLMO8, SLMO24	•   TMANI, TMANI-IM, TMANI-BRA	•   ALUM4, ANI4, ANI4R
•   SLU8, SLU8R	•   TMC16, TMCAS, TMCAS-2	•   GEE12, GEE16, GEE50
•   STLS2, STLS4, STLS4R	•   TST1	•   REALS, STBG4

NOTE (only for Brasil): Danger of damage to property. To protect against overvoltage caused by lightening, the use of the lightening protection strip with the part number C39334-Z7052-C33 is absolutely mandatory. The power supply cable of the HiPath 3000 must be inserted into the lightening protection strip. The lightening protection strip must be connected to the power supply.

Topic
Section 3.1 "Functional and Model Overview of the Boards"
Section 3.2 "Central boards"
Section 3.3 "Peripheral Boards"
Section 3.4 "Options"