9.7.2 Day or Night

9.7.2	Day or Night

Settings | Classes of service | Day
Settings | Classes of service | Night

You use Day or Night to continue the process by assigning CO call privileges per route (trunk group) to the individual COS groups.

The stations can be restricted in their access to external call numbers by assigning class of service groups on the Station tab. The individual class of service groups for day and night modes can be assigned appropriate authorizations on the Day or Night tab.

Default settings for the CO call privileges per COS group

•	Germany and Greece:

COS group 1:

Internal (for all routes)

COS group 2:

Outward-restricted (for all routes)

COS group 3:

Denied list 1 (for all routes)

COS group 4:

Allowed list 1 (for all routes)

COS group 5:

Denied list 2 (for all routes)

COS group 6:

Denied list 3 (for all routes)

COS group 7-15:

Unrestricted (for all routes)

•	Other countries:

COS group 1-15:

Unrestricted (for all routes)

Access for networked systems:

Class of service in the subsystem

Authorization that accesses the subsystem in the main system for the station

Internal (0)

internal (0)

Outward-restricted (1)

Allowed list (2-7)

Denied list 1 for the main system (8)

Denied list (8-13)

Denied list 1 for the main system (8)

Unrestricted (14)

The Internal, Outward-restricted or Unrestricted Classes of service are adopted in the main system. If allowance or denial is assigned to a subscriber in the sublevel, the denied list always accesses denied list 1 in the main device during a CO connection.

9.7.2.1

Selection table

All class of service groups of the communication system are displayed in this list. When you select one of the class of service groups, the assigned CO call privileges Day/Night as well as the assigned stations (Members) are displayed for each route.

9.7.2.2

CO call privileges Day/Night, Route, Class of Service table

The CO call privileges are assigned in this table. A total of 15 Classes of service groups are possible.

Route, Class of service columns

A distinction is made between the following classes of service:

Class of service

Description

Internal (0)

The station can make internal calls.

Central speed dialing is allowed.

External incoming calls cannot be answered.

Outward-restricted (1)

The station can make internal calls.

Central speed dialing is allowed.

External incoming calls can be answered.

Allowed list 1-6 (2-7)

The station can make/answer the types of calls listed for Code 1 (Allowed list 1-6).

Only the numbers entered in Allowed/Denied numbers can be dialed.

Denied list 1-6 (8-13)

The station can make/answer the types of calls listed for Code 1 (Denied list 1-6).

All call numbers, except the entries in the Denied list, can be dialed.

Unrestricted (14)

The station has unrestricted access for both incoming and outgoing calls.

All restrictions are effective only for the lines for a route of the type CO (see Routing parameters).

The digits entered in this list can be dialed from a station with the authorization level 2. The suffix dialing of additional digits is not subject to any restrictions.

9.7.2.3

Members table

This list shows the stations assigned to the COS group selected in the Selection list (see Station).

HiPath 3000/5000 V8, Manager E, Administrator Documentation, Issue 11		up

Disclaimer & Copyright	ID: P31003H3580M1000176A9	2011-03-18