9.2.6 |
Fax/Modem |
| Fax/Modem should only be configured in cases where the customer has an IP network without a HiPath 5000 RSM/AllServe server installed. In the HiPath 5000 RSM/AllServe system, the tables for every involved node are generated automatically and silently (without a visible dialog) by the server. |
| The Fax/Modem table is evaluated for fax/modem connections only in the case of an IP network. A maximum of 128 call numbers of fax or modem ports, which are not installed in the own node but in the networked remote node, can be entered in the table. In the case of an incoming connection, the A station number is searched in this table. If the number is found there, this means that a fax or data connection is involved, and the Resource Manager in the own system can activate the required DSP. |
Call no. (call number) column |
| In the Call No. column, you can enter a call number of up to 16 digits for a fax or modem port in a networked node. |
Fax / Modem column |
| You can select whether the station number is assigned to a fax or modem port. If no selection (blank) is made, the station number will no longer be evaluated. |
Check column |
| If the entered call number is not unique within the table (from a digit analysis point of view), a red arrow appears. The row in question must then be corrected (it is not possible to import an inconsistent CDB into the system). |
All database equal button |
| All database equal loads the contents of the table into all currently loaded/opened CDBs. |
|
| HiPath 3000/5000 V8, Manager E, Administrator Documentation, Issue 11 | up  |
|
 |
||
| Disclaimer & Copyright | ID: P31003H3580M1000176A9 | 2011-03-18 |
