 |
|
|
|
8.13 |
Load APS Texts |
| Load APS texts is used for exchanging variable texts in existing files. For a list of supported file types, see Section 1.3 "File Types". |
Load source File |
| Various source files can be selected here. |
Load LNG file |
| The corresponding LNG file can be selected here. The compatibility stamp and the hardware variant must match in this case. |
Loadable texts |
| All fixed and variable languages are shown here in a source file. The respective variable languages can be altered in this field. The fixed languages cannot be configured as variable languages. |
Save file |
| The file can be saved here in the required format. As of Release 3.0, the target and source files must have the same format. |
| Note: |
| - | Once the function "Load APS texts" has been executed, HiPath 3000 Manager is reset. This means that the customer database file must be reloaded ("Open customer database"). |
|
| |
| HiPath 3000/5000 V8, Manager E, Administrator Documentation, Issue 11 | up  |
|
|
||
| Disclaimer & Copyright | ID: P31003H3580M1000176A9 | 2011-03-18 |