5.11  

Network 
 

Feature  
Setup  
Testing  
Satellite CS Capability  
Set trunk type:
Routing parameters  
Set ISDN parameters:
Trunks  
Routes  
Call a station in another networked communication system.  
Tie Trunk Via TIEL  
Adapting the signaling protocol:
Trunks, Double-click TIEL Param 1  
Trunks | Parameter/MSI flags, Setting the Maintype  
-  
Closed Numbering  
Station view: Flags, Least cost routing  
Call the internal number of another networked station.  
Open numbering scheme  
Flags, Open numbering scheme, Voice mail node number, Node number  
Routes, PABX number - incoming  
CorNet CO call privileges  
Station  
Allowed/Denied numbers  
Trunks  
Routes  
Routing parameters  
Dial an external, outgoing connection from the satellite CS via the main CS.  
Outgoing connections are possible if permitted by the subscriber class of service.  
Call Detail Recording With Networking  
Output format  
Conduct a chargeable call. The charges for this call are displayed as configured.  
Station Number/Name Display  
Display  
Call a networked station.  
Depending on the configuration, you see either the station name or the station number.  
Call Forwarding With Rerouting  
Routing parameters  
Forward a call to station C in the main CS from station B in the satellite CS.  
Call station B in the satellite CS from station A in the main CS.  
If possible, the trunks to the satellite CS are released.  
QSIG, COS changeover  
Trunks | Parameter/ISDN flags  
ISDN flags => QSIG  
-