13.3.23  
En-Bloc Dialing 
 

Definition  
Dialed digits from the communications system are temporarily stored and sent out as a block of data (i. e. complete number) with block digit transmission (block dialing per route). Dialing only takes place when a timer has elapsed after the last digit has been dialed or when the end-of-dial code # has been entered. En-bloc dialing to the central office is required with PRI in the USA.
HiPath 3000 can also receive complete blocks of data from the network.

Model-Specific Data  

 Subject  
 HiPath 3800  
 HiPath 3550  
 HiPath 3500  
 HiPath 3350  
 HiPath 3300  
Feature available in  
 x  
 x  
 x  
Hardware requirements  
 -  
 -  
 -  
Software requirements  
 V5.0 or later  
 V1.0 or later  
 V1.0 or later  

HiPath 3000/5000 V8, Feature Description, Issue 10   up Top
Disclaimer & Copyright   ID: P31003H3580F100017618   2011-02-07