10.27.8 |
Central Cross-System Busy Signaling |
| This feature is supported only in the direction of an Octopus E 300/800 system (A6, Release 6.3 or later) from Deutsche Telekom AG. The destination of cross-system busy signaling can only be the central Octopus E 300/800 attendant console (AC). Systems in the QSig network can report the operating states of selected stations to the central attendant console of a CS (can be main CS or satellite CS). |
| The following operating states can be signaled for the telephones: |
| • | Free |
| • | Busy internally |
| • | Busy externally |
| • | Defective |
| The numbering plan in this network must be closed and it must be possible to access the CS via the first administered QSig port on the remote system. Operating states cannot be transmitted via CSs functioning as gateway or transit nodes. |
| HiPath 3000/5000 V8, Feature Description, Issue 10 | up |
|
|
||
| Disclaimer & Copyright | ID: P31003H3580F100017618 | 2011-02-07 |