2.17 Whisper/Off Hook Announcement

2.17	Whisper/Off Hook Announcement

Implementing features, see also Manager E Whisper/Off Hook Announcement

Definition

The "Whisper/Off Hook Announcement" feature allows stations (station C in the illustration) to monitor an existing call between two stations (stations A and B in the illustration), and to pass on information to one of these stations (A). In other words, the connection is switched in such a way that only station A hears station C, and station B only hears A.

Although there is no connection between station B and station C, user B may be able to hear the muffled tones of what user C is saying because of feedback on station A.

The feature is activated by station C by dialing a code. There is a partially assigned key on the telephone (only the code is assigned to the key, the phone number must be dialed). A new menu item will be incorporated into the Service menu, the Idle/Call menu will remain unchanged.

The option for activating the feature is linked to a new, user-specific class of service. A second class of service can be used to protect station A from Whisper/Off Hook Announcement.

The feature is deactivated by the activating station (station C) or by modifying the features, but NOT through a separate code.

Restrictions

•	If at least one station in the original call (station A or B) is not a TDM station, the HiPath switching network is not yet involved at the time of activation and the switchover cannot be performed without a brief interruption in the call between A and B.

•	Stations A and C must be in the same node.

•	The feature can only be activated by station C from the idle/ready state.

•

Only telephones with a display that can be controlled by the system (optiPoint, OpenScape Personal Edition, OpenStage TDM) can function as destination telephones for Whisper/Off Hook Announcement (station A). Analog telephones cannot function as destination telephones for Whisper/Off Hook Announcement.
CMI is not supported in HiPath 4000.

Model-Specific Data

Subject

HiPath 3800

HiPath 3550

HiPath 3500

HiPath 3350

HiPath 3300

Feature available in

Hardware requirements

TDM telephone with display

Software requirements

V6.0 or later

Dependencies/Restrictions

Just as with the feature Silent Monitoring, Whisper/Off Hook Announcement is only permitted if the call between station A and station B is a simple connection between two stations. The Whisper/Off Hook Announcement feature cannot be used for consultation calls or conference calls.

If the Whisper/Off Hook Announcement feature is active and station A or station B initiates another call-related feature, the Whisper feature will be deactivated. The table below provides further information on interaction with particular features:

Feature

Station A

Station B

Station C

Possible

Action

Possible

Action

Possible

Action

Consultation Hold, Call Hold, Park, Common Hold

Yes

Deactivate Whisper/Off Hook Announcement

Yes

Deactivate Whisper/Off Hook Announcement

No 1

Negative acknowledgement

Transfer

Conference

Call waiting

Yes

Call waiting
(answer)

Yes

Deactivate Whisper/Off Hook Announcement

Yes

Deactivate Whisper/Off Hook Announcement

Yes

Negative acknowledgement

Override

No 2

No2

DTMF
Transfer

Yes

FEAT counter

Associated services

DISA/DISI

1Consultation Hold should not be offered to station C in the menu. The keystroke that would normally initiate Consultation Hold is acknowledged with "not possible".

2Prevent as soon as PROGRESS message is initiated ("Override Possible" should no longer be sent)

HiPath 3000/5000 V8, Feature Description, Issue 10		up

Disclaimer & Copyright	ID: P31003H3580F100017618	2011-02-07